Note: The following FAQ demonstrates the usage of the Command Prompt in Windows XP.
Step 1: Click Start and select Run.
Step 2: In the Run command box, type cmd and click OK.
Step 3: In the command prompt, type ipconfig/release.
Step 4: After the IP addresses are released, type ipconfig/renew.
Step 5: Your adapter will send a request for a DHCP (automatically) obtained IP address, netmask, gateway, and DNS if auto-DNS is enabled.
If you are having problems obtaining an IP address using DHCP, you may want to try to static (manual) the IP address. Click here for assistance.
Note: Verify that you have a DHCP server on your D-Link network, such as a router. Most routers have a setting to disable or enable DHCP.
Tags: D-Link network, IP address, network adapter, release