Step 1: With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.

Step 2: Hold paper clip down for 10 seconds and release.

Note: Do not repower unit during this procedure.

Step 3: The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.

Resetting the D-Link DAP-1522 will change all settings back to factory defaults.

Note: The factory defaults name is admin, and password is blank(nothing).

Step 1: Open a web browser and entering the IP address 192.168.0.50. Press Enter.

Step 2: The default password is blank (nothing). Click Log In.

Step 3: Click Maintenace at the top.

Step 4: In the Admin section enter your new password next to Password and enter it again next to Verify Password.

Step 5: Click Save Settings at the top to save the new password.

The D-Link Xtreme N™ Duo Wireless Bridge/Access Point is designed for users looking to create a wireless network or to connect multiple wired devices to an existing wireless network. Xtreme N Duo is the latest addition to the award-winning Xtreme N product family. Duo means the DAP-1522 works with next generation dual band (2.4GHz or 5GHz)* 802.11n wireless devices as well as legacy 802.11g products.

Bring your wired devices into the Wi-Fi world with the DAP-1522 Xtreme N® Duo Wireless Bridge. You’ll be Xtremely glad you did.

These products use the current draft version of the 802.11n standard. Compatibility with other draft-n and current 802.11n products is guaranteed by the Wi-Fi Alliance. However, some features were added in later revisions of the spec, and it is possible that they will not work correctly. In most cases a firmware upgrade will solve any problems (consider if you feel confident performing such an update). Also, while 802.11n is designed to be backwards compatible with 802.11g, 802.11b and 802.11a, it had been noticed that -n can interfere with the operation of current 802.11b and g products.

Other features, see http://www.dlink.com/products/?pid=DAP-1522

Price range: $74.99 – $102.24

User Reviews:

chanman said:

HD Movie :and You Tube streaming on to my TV work excellent, which is really all that matters. Customer support, which you will need to set it up, was probably the most knowledgeable I have worked with in recent years. Works with Apple Time Capsule..

Cons: Difficult to set-up unless you happen to have a d-link router and use the one-button set-up. Call 24/7 help desk and they will walk you through set up. Manuals are weak. Also, range is limited. Can’t go in a drawer or cabinet. Needs to sit on top..

Summary: For the price, it is a good product. Actual data streaming works very well, which is ultimately all that matters. Manuals are weak but customer service is strong. Range is limited, but sufficient if you don’t mind putting the unit on the surface.

bc0203 said:

Pros: Easy, pushbutton setup, includes 4-port hub..

Cons: Web interface could be a bit easier to access..

Summary: I have a home theater system with multiple devices that require Internet access, some of them are not wireless. The D-Link DAP-1522 allows me to route everything through a single access point, with all devices set to “wired” mode and the router assigning DHCP addesses to each device.

Step 1 Open a web browser and type the friendly name (http://dlink). Press Enter .

Step 2 The default password is blank (nothing). Click Log In.

Step 3: Click Maintenace at the top:

Step 4: In the Admin section enter your new password next to Password and enter it again next to Verify Password.

Step 5: Click Save Settings at the top to save the new password.

NOTE: If you forget your password you will have to reset the DAP-1555/1522.

DUAL BAND WIRELESS NETWORKING

The D-Link® Xtreme N™ Duo Wireless Bridge/Access Point is designed for users looking to create a wireless network or to connect multiple wired devices to an existing wireless network. Xtreme N Duo is the latest addition to the award-winning Xtreme N product family. Duo means the DAP-1522 works with next generation dual band (2.4GHz or 5GHz)* 802.11n wireless devices as well as legacy 802.11g products.

CONNECT MULTIPLE DEVICES

The Wireless Bridge feature of the DAP-1522 allows you to easily connect up to 4 Ethernet-enabled devices in your entertainment center to your wireless network. Connect devices such as Game Consoles, Digital Video Recorders (DVR), and Digital Media Adapters (DMA) to the built-in 4-Port Gigabit Switch.

WHAT THIS PRODUCT DOES

Wireless Bridge Mode

Use the Xtreme N™ Duo Wireless Bridge / Access Point (DAP-1522) to connect up to 4 Ethernet-enabled devices such as Game Consoles, Digital Video Recorders (DVR), and Digital Media Adapters (DMA) to your wireless network.

Access Point Mode

Connect the DAP-1522 to an existing wired network and easily enable wireless connectivity in your home. Use your new wireless network to stream HD multimedia content, play multiplayer games, or make Internet phone calls (VoIP).

DAP-1522 Firmware:

Notice:

Do NOT upgrade firmware on any D-Link product over a wireless connection.
Failure of the device may result. Use only hard-wired network connections.

Latest Version:1.21
Date:9/16/2009
Download Now From www.dlink.com

Download Now From tsd.dlinktw.com.tw