Aug 09

When you first install the drivers for the D-Link DBT-120 you may be asked for a Security Code in order to continue the installation.

After you´ve installed the drivers and configured your DBT-120 you will be asked to create a Pin Code in order to pair the two Bluetooth devices.

Pin Code – This is something that you create. This is an authentication request. This notification appears automatically in a balloon over the Windows system tray if a Personal Identification Code is required before a connection can proceed. If the PIN code does not match the code entered on the remote device, the connection will not be allowed. Once the remote device has been authenticated this notification will not appear again, unless the paired relationship is broken and the devices must re-sync.

Security Code – A 32-digit security code that is included with the DBT-120 and is located on the back flap of the driver CD cover. If it is a rev.B4 then you shouldn´t be asked to input one.

Tags: , ,

Aug 09

Pair your Phone with the D-Link DBT-120:

Step 1: Right click on the Bluetooth Manager and select Add New Connection


Step 2: Select Express Mode for easy setup (Make sure your phone or device is set to Discoverable mode)


Step 3: The DBT-120 will scan for discoverable devices and creat a list. Select your phone or device and click Next.


Step 4: The DBT-120 Manager will ask for a Bluetooth passkey (PIN) number if required. Here you will enter a pass key you choose to use and click OK (4 digets minimum)


Once you click OK your phone will ask to connect to this device and prompt for a pass key. Enter the pass key (PIN) you chose in the Bluetooth Manager (4 digets minimum)

Step 5: Click Next to skip Advanced Modem Settings (You do not need this to pair)


Step 6: Click Finish to end the Pairing of the device (Or add a Username and Password)


You are now paired for simple file transfers and Bluetooth operations between devices.

Tags: ,

Aug 09

This article teaches you to transfer files from a Sony Ericsson P800 to a computer using a D-Link DBT-120.

Make sure the D-Link software and driver are installed from the CD-ROM.

Step 1: Select Discoverable under the Bluetooth menu on your Sony Ericsson phone.

Step 2: Click on Add to find the PC. Your computer name will appear in the list. Click your computer name.

Step 3: Enter a pin code for the connection. Click on the pop-up text on your computer.


Step 4: Enter the same pin code into the PIN Code box.


Step 5: Open a picture under Sony Ericsson P800. Select Send as.


Step 6: Choose Send as: Bluetooth.

Step 7: Select your computer name under the available device list. The picture will transfer to the computer.

Tags: , , ,

Feb 17

Step 1: Insert the DBT-120 Wireless Bluetooth 2.0 USB Adapter into you Vista / Windows 7 PC.

Step 2: Reboot the computer. Waiting for Vista / Windows 7 to recognize the new hardware. Once it prompts you to locate the driver. Click Locate And Install Driver Software (Recommended).


Step 3: Allow Vista / Windows 7 to locate and install drivers from the Internet.

Step 4: After the drivers are installed, Vista / Windows 7 will tell you the device has installed properly and is ready to use.

The D-Link DBT-120 is now installed and ready to use in Vista / Windows 7.

Tags: ,