Apr 08

The tollowing chart contiains the different status for the LED indicator on the D-Link DCH-S150 Wi-Fi motion sensor:

 

WPS Blinking Green Press for one second to start the WPS connection process. The Power/Status LED will start to blink green.
Reset Solid Red Press and hold until the Status LED turns red in order to reset the device back to the factory default settings (for about 10 seconds).
Power/Status LED Solid Green The DCH-S150 is successfully connected to your network.
Blinking Green The WPS process is in progress.
Blinking Orange The Motion Sensor is not properly connected with your wireless network.
Solid Red The Motion Sensor is powering on, attempting to upgrade firmware, or the device is defective.
Off If the DCH-S150 will not power on, try plugging the device into another outlet.
Motion Sensor PIR (Passive Infrared) sensor for detecting motion.

Tags: , ,

Jul 27

To install your DCH-S160, first download and install the mydlink™ Home app on your mobile device. This app will walk you through installing and configuring your D-Link DCH-S160. If you have the mydlink™ Home app previously installed on your device, please ensure you have the latest version of the app by checking for updates and updating it if necessary.

Step 1:

On your mobile device, download mydlink Home by going to mydlinkhomeapp.dlink.com, or by searching for mydlink Home in the iTunes App Store or Google Play.

DCH-S160 Wi-Fi Water Sensor

Step 2:

Launch the mydlink Home app and create a new account or sign in to your existing account.

DCH-S160 Wi-Fi Water Sensor1

Note:

iOS: If you are asked about allowing the app to access your location, select Allow.

Android: Make sure location services are turned on in your phone’s settings.

Step 3:

After logging in, tap the Settings icon in the top-left corner,select Add New Device, and follow the instructions.

DCH-S160 Wi-Fi Water Sensor2

Step 4:

When you are asked to scan a QR code, use the code on the Quick Install Card in your package or on the label attached to your device.

Step 5:

In order for notifications to work, you must set up a rule first using the mydlink Home app’s My Actions page. Please refer to page 12 for details on how to set up a rule.

Congratulations, your D-Link DCH-S160 is now ready to use!

Tags: ,

Jul 21

1.Select one of the following methods to download the mydlink™ Home app:

• Search for mydlink home at the iOS App Store or Google Play
• Scan the QR code
• Go to http://dlink.com/mydlinkhomeapp

DCH-S160

2.Launch the app and follow the instructions to connect and configure your water sensor.

Continue to step 3 on the back of this card.

3.Below is the product information QR code which will be used with the mydlink Home app during setup. The device’s default SSID,PIN code, and serial number are also printed below.

Tags: , ,

css.php