Nov 17

If your camera is connected to your router as a DHCP client, the IP address of your camera will change depending on the DHCP address assigned to it by your router. In order to access the web-based user interface, follow the below steps to determine the IP address of your camera.

Note: the following instructions are for Windows® 7.

 

Step 1: Open My Computer.

 

Step 2: From the menu on the left-hand side, click on Network.

A10902_image1

 

Step 3: Under the Media Devices section, locate the DCS-2330L and right-click on the icon. Select Properties from the pop-up menu.

A10902_image2

 

Step 4: In the Properties window, locate the IP address at the bottom of the window. This is the IP address of your camera. Make a note of this address.

A10902_image3

 

Step 5: Open a web browser, such as Internet Explorer, and enter the IP address of your camera in the address bar.

A10902_image4

 

Step 6: A pop up window will ask for the login credentials. The User Name for the administrator account is admin. Enter your administrator password in the Password field. If you have not changed this from the default, leave this field blank. Click OK.

Tags: , ,

Nov 14

Step 1: Open a web browser and enter the IP address of your camera in the address bar (default is 192.168.0.20). If you do not know the IP address of your camera, please refer to the section entitled “How do I find the IP address of my D-Link DCS-2330L and access the web-based user interface?” in this FAQ. Press Enter.

 

Step 2: The User Name for the administrator account is admin. Enter your administrator password in the Password field. If you have not changed this from the default, leave this field blank. Click OK.

A10907_image1

 

Step 3: Click on Setup from the menu at the top of the page.

A10907_image2

 

Step 4: Click Audio and Video from the menu at the left-hand side of the page.

A10907_image3

 

Step 5: To enable the microphone, ensure the Audio in off checkbox is unchecked. You can adjust the gain for the audio in (microphone) using the drop-down menus on the right-hand side of the box.

Click Save Settings to save the current configuration.

A10907_image4

Tags: , ,

Dec 26

Step 1: Download the install wizard for your camera from

 

http://www.mydlink.com/support

 

Step 2: Launch the install wizard:

 

  • Step 2.1 : Select a language from the drop-down menu and click Start.

A10901_image1

  • Step 2.2: Accept the End User License Agreement by checking the box next to “I accept these terms and conditions”, then click Next.

A10901_image2

  • Step 2.3: Follow the on-screen instructions to connect your camera to your router and connect the power. Click Next after you have completed each step.

A10901_image3

A10901_image4

A10901_image5

A10901_image6

  • Step 2.4: Confirm that the LED on the front of the camera is lit solid green.

A10901_image7

  • Step 2.5: Select your DCS-2330L using the radio button from the menu on the left-hand side of the camera name. Enter and confirm a password for the Administrator account in the fields provided. This password will be required when logging in to the camera’s web-based configuration interface. Click Nextto continue.

A10901_image8

  • Step 2.6: Using the radio buttons, select how you wish to connect your camera to your router for normal operation. You can choose to connect using wired connection (Ethernet cable), or a wireless connectionby using Wi-Fi Protected Setup (WPS), or manually by Selecting a wireless network. Choose the appropriate radio button for your configuration, and click Next to continue.

A10901_image9

2.6.1 If you selected Ethernet cable connection, follow the on-screen instructions to ensure that your camera is connected to your router using an Ethernet cable. Once completed, click Next to continue the wizard.

A10901_image10

A10901_image11

A10901_image12

2.6.2 If you selected By using Wi-Fi Protected Setup (WPS), follow the on-screen instructions to connect your camera to your wireless router using WPS. Once completed, click Next to continue the wizard.

Note: Your router must support WPS Push-button Connection (PBC) in order to use this method.

A10901_image13

A10901_image14

A10901_image15

A10901_image16

2.6.3 If you selected By selecting a wireless network, choose an available wireless network from the drop-down menu. If you do not see your wireless network in the list, click Rescan to search for wireless networks again. If your network requires a password, enter it in the Wireless password field. Click Next to continue.

A10901_image17

Step 2.7.1: In order to use the cloud features of your camera, you will need to register it with your mydlink account. If you do not have a mydlink account, you can create one during this step.

To add the DCS-2330L to your existing mydlink account, select Yes, I already have a mydlink account, then enter your mydlink account username (email address) and password in the fields provided and clickNext.

A10901_image18

2.7.2: If you selected No, I want to sign up for a new account, enter the information required for account registration in the fields provided. Check the box to indicate that you have read the Terms of Use and Privacy Policy for mydlink Cloud Services. Click Next to continue.

A10901_image19

A10901_image20

2.7.3: If you do not wish to use the mydlink service, select I don’t want to enable mydlink cloud service. You will not be able to use any of the cloud features associated with your camera. Click Next to continue.

 

  • Step 2.8: Setup is complete. A summary page with display your camera’s setup details, as well as your mydlink account information. Click Finish.

A10901_image21

 

 Step 3: You can now log in to your mydlink account to view and manage your DCS-2330L by visiting http://www.mydlink.com

A10901_image22

Tags: ,

css.php