Nov 19

Step 1 Log into the web-based configuration of the camera.

Step 2 Click the Maintenance tab and then click Device Management to the left.

A10431_image1

Step 3 Click Off using the radio buttons next to LED Control.

Step 4 Click Apply to save the settings.

Tags: , ,

May 13

This FAQ is for the D-Link DCS-930L,DCS-920,DCS-900 cameras.

Step 1: Click on the D-Link Setup Wizard SE icon that was created in your Windows 7 Start menu.

Web-Base-configuration-1

Note: The Setup Wizard will appear and show the MAC address of the camera and an IP Address (which may or may not be correct depending on what you have your camera connected to). If you have a DHCP server on your network, there will be a valid IP Address displayed here.

Note: A DHCP server is a device that supplies the same IP address.

Step 2: Click the button labeled Link to access the web configuration.

Step 3: Enter admin as the default username and leave the password blank. Click OK to continue.

Web-Base-configuration-3

Tags: , ,

Apr 16

1.Can the D-Link Network Camera be used outdoors?

The Network Camera is not weatherproof. It needs to be equipped with a weatherproof case to be used outdoors and it is not recommended.

2.What is the difference between D-Link D-ViewCam and the traditional surveillance system?

D-Link D-ViewCam records video in MJPEG and MPEG4 formats, stores high quality image data on computer hard disks, and provides easy query and review of the stored video. Traditional surveillance systems use videotape for storage and review, which is hard to managed, time consuming and the recorded video will degrade over a period of time or usage.

d-link-dcs-cameras

3.What is the Lux Factor for my Internet camera?

Lux is a unit of illumination equal to one candle intensity or equal to one lumen per square meter.

Note: Lower LUX value cameras work better in low light.

DCS-900/DCS-900W
2.5Lux @ F1.4

DCS-910/DCS-920
1.0Lux @ F1.9

DCS-950/DCS-950G
0.5 Lux @ F1.4

DCS-2000/DCS-2100+
2.5Lux @ F1.4

DCS-3220/DCS-3220G
1.0Lux @ F2.0

DCS-5300/DCS-5300W/DCS-5300G
1.0Lux @ F2.0

DCS-6620/DCS-6620G
0.05Lux

DCS-5610
1.0Lux @ F1.9

DCS-6110
1.5Lux @ F1.4

DCS-3410
0.3Lux @ F1.6 (typical); 0 Lux (10 meter range with optional IR Lens)

DCS-3415
1.61Lux @ F1.4 1/30s 0.38 Lux F1.4, 1/30s, ICR on

4.Why use the D-Link D-ViewCam Intelligent Solution?

D-Link D-ViewCam is the bundled video surveillance system software that provides advanced security monitoring and device management functions to use with D-Link Internet cameras. This software uses IP technology to provide comprehensive management functions such as system controls, live video feeds and archived recordings. 

5.What Should my D-Link DCS camera box contain?

IP CAMERA PACKAGE CONTENTS:

DCS-1000

DCS-1000, CD, AC Power Adapter, Mounting Bracket, QIG, CD (Manual, QIG, IPView, Setup Wizard), Ethernet Cable

DCS-1000W

DCS-1000W , 2 Antennas, AC Power Adapter, Stand/Mounting Bracket, QIG, Ethernet Cable, CD(Manual, QIG, IPView, Setup Wizard)

DCS-1110

DCS-1110 device, Master CD with manual and software, QIG, 2.0dBm antenna, 5V 2.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-2000

DCS-2000, AC Power Adapter, CD (Drivers, Software, QIG, Manual), Camera Stand and Bracket, Ethernet Cable

DCS-2100+

DCS-2100+, Stand, CD, Manual,QIG, 2 Antennas, Bracket

DCS-2100G

DCS-2100G device, Master CD with manual, software, QIG, 5V 2A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-2120

DCS-2120 device, Master CD with manual software, QIG, 2.0dBm antenna, 5V 2.0A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-30

Enclosure

DCS-3220

DCS-3220 Device, CD with manual, QIG, 12V 1.5A Switching Power Adapter, Cat.5 RJ-45 Cable, Mounting Bracket.

DCS-3220G

DCS-3220G Device, CD with manual, QIG, 12v 1.5A Switching Power Adapter, Cat.5 RJ-45 Cable, 2.0 dBm Antenna, Mounting Bracket.

DCS-3420

DCS-3420 Device, Switching power adapter, Bracket, Antenna.

DCS-40

Enclosure, Bracket

DCS-45

Housing, Screws for housing, Cable Glands, Bracket, Screws for bracket

DCS-50

Camera Enclosure, Bracket

DCS-5220

DCS-5220 device, Master CD with Manual and Software, CAT-5 RJ-45 Cable, Mounting Kit, Power Adapter, Antenna, QIG.

DCS-5300

DCS-5300 device, 12V/1.5A Power Adapter, CAT5 Ethernet Cable, QIG, Master CD, A/V Cable, Remote Control, Stand

DCS-5300G

DCS-5300G Device, CD with manual, QIG, 12v 1.5A Switching Power Adapter, Cat.5 RJ-45 Cable, 2.0 dBm Antenna, AV Cable, Remote Control, Stand and Mounting Bracket

DCS-5300W

DCS-5300W Camera, 12V/1.5A Power Adapter, CAT5 Ethernet Cable, QIG, Master CD, A/V Cable, Remote Control, Stand

DCS-60

Camera Enclosure, Bracket

DCS-6620

DCS-6620 Device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket Remote Control

DCS-6620G

DCS-6620G device, Master CD with manual, software, QIG, 2.0dBm antenna, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket, Remote Control

DCS-70

Camera Enclosure, Bracket

DCS-900

DCS-900 Internet Camera, Software in CD-ROM, QIG, Power Adapter(DC5V), Stand, Ethernet Cable

DCS-900W

DCS-910

DCS-910 device, Master CD with manual, software, QIG, 2.0dBm antenna, 5V 5.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-900W Internet Camera, Power Adapter, QIG, CD-ROM, Ethernet Cable, Antenna, Swivel Stand

DCS-950

DCS-950 Device, Master CD with manual & software, QIG, 5V 2.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-950G

DCS-950G Device, Master CD with manual & software, QIG, 2.0dBm Antenna, 5V 2.5A Switching Power Adapter, Cat.5 RJ-45 Cable, Stand and Mounting Bracket.

DCS-G900

DCS-G900 device, Master CD with manual & software, QIG, 2.0dBm antenna, 5V 2.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-920

DCS-920 device, Master CD with manual, software, QIG, 2.0dBm antenna, 5V 5.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-910

DCS-910 device, Master CD with manual, software, QIG, 2.0dBm antenna, 5V 5.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-5610

DCS-5610 device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-6110

DCS-6110 device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Dome Enclosure, Ring Enclosure, Screwdriver, Screws and I/O Connector

DCS-3410

DCS-3410 device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-3415

DCS-3415 device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

Tags: , ,

Dec 27

The default port used by the camera D-Link DCS-910/DCS-920 is 80. If this port is available to use, you do not have to open a second port. You will need to open port 80 on your router or firewall.

If port 80 is not available (for example , if you are already using port 80 to run a Web server or your ISP blocks access to on port 80*) or are using multiples cameras, you MUST open a second port and designate a new Web server port.

The ports that are opened must be unique for each camera in order to successfully view the images remotely.

Step 1: Open a web browser and type the ip address of your router http://192.168.0.1 in order to open port 81.

Step 2: On your D-link router click on Advanced tab at the top then click on Virtual Server on the left side.

Step 3: Enter valid ports on the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual Server List to enable your settings.

Step 4: Open a web browser and type the IP address of your camera (192.168.0.99) and click on the Setup Tab.

Step 5: Click Network Setup on the left side.

Step 6: Click Enabled, next to Second HTTP Port, and type in the port number you want to use. You can use any port number that is not being used.

Step 7: Click on Save settings.

Tags: , , ,

Dec 27
Cameras IP Address Configuration Default Username Default Password
DCS-900 Rev. A 192.168.0.20 Web Based , IPView , D-View Cam & Active X Plugin admin blank
DCS-900 Rev. B 192.168.0.20 Web Based , IPView & D-View Cam admin blank
DCS-900W 192.168.0.20 Web Based , IPView , D-View Cam & Active X Plugin blank blank
DCS-910 192.168.0.20 Web Based , D-View Cam 2.0 admin blank
DCS-920 192.168.0.20 Web Based , D-View Cam 2.0 admin blank
DCS-950 192.168.0.20 Web Based , IPView & D-View Cam admin admin
DCS-950G 192.168.0.20 Web Based , IPView & D-View Cam admin admin
DCS-G900 192.168.0.20 Web Based , IPView & D-View Cam blank blank
DCS-1000 192.168.0.20 Web Based & IPView blank blank
DCS-1000W Rev. A 192.168.0.20 Web Based , IPView & Active X Plugin blank blank
DCS-1000W Rev. B 192.168.0.20 Web Based , IPView & Active X Plugin blank blank
DCS-1110 192.168.0.20 Web Based & IP View admin admin
DCS-2000 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-2100 192.168.0.99 IP Surveillance & D-View Cam admin blank
DCS-2100+ 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-2100G 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-2120 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-3220 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-3220G 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-3420 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-5220 192.168.0.99 IP Surveillance & D-View Cam admin blank
DCS-5300 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-5300G 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-5300W 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-5610 192.168.0.99 Web Based , D-View Cam 2.0 admin blank
DCS-6620 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank
DCS-6620G 192.168.0.99 Web Based , IP Surveillance & D-View Cam admin blank

Tags: , , ,

css.php