D-Link Blog Home

The default IP settings for the device are:

- IP Address: 10.90.90.90
- Subnet Mask: 255.0.0.0
- Default Gateway: 0.0.0.0

All ports are untagged members of the default VLAN.

Step 1: Make sure the device is powered on. Connect your computer to one of the 10/100 Mbps Ethernet ports located on the front panel using an Ethernet cable. Make sure the cable connections are secured.

Step 2: Statically assign your IP address settings using the following parameters.

Step 3: Open a web browser and type in the address bar, type in the URL http://10.90.90.90 and press Enter on the keyboard. Click on Login at the top of the page. By default, there is no user name and password, click OK. You will now be logged into the Web Management Interface.

Tags: DES-3526, interface, switch, web management

Step 1: Login to the DES-3526 via Console. For the complete procedure on logging into the management interface via Console, Power cycle the device by pulling the power cable located on the rear panel of the device and reconnecting the power cable.

Step 2: At the boot sequence, immediately after the Please wait, loading Runtime image… process completes, press the Shift and 6 Shift+6 keys on the keyboard simultaneously. The device will now enter Reset Configuration Mode.

Step 3: At the Reset Configuration command window, type the command reset password and press Enter on the keyboard. Press the Y key to proceed with the system save. Type the command restart and press Enter. Press Y to reboot the DES-3526 after saving the changes.

Note: In the Reset Configuration Mode, you may also reset the device to factory defaults by executing the command reset factory.

Step 4: All administrator account passwords will be deleted. You will now be able to login to the D-Link DES-3526 without a password.

Note: If you have reset the unit to factory defaults, there is no administrator user name and password by default.

Tags: DES-3526, password