Aug 10

Add more computers, gaming systems and cameras to your network without slowing down your connection with the D-Link DES-1105 5-port Unmanaged Desktop Switch.

D-Link DES-1105 Desktop Switch Features

● Add More Devices and Computers to the Network
● No Software or Configuration Required
● Delivers up to 200Mbps Throughput per Port in Full-Duplex Mode



Expand your wired home network with the D-Link 5-Port 10/100Mbps Desktop Switch (DES-1105). This Desktop Switch fits virtually anywhere because of its compact size. Its power connector and ports are conveniently located in the rear to avoid messy cables on the desk. This Desktop Switch can also be mounted on a wall or underneath a desk with the included wall mounting kit.


The Desktop Switch receives and forwards traffic seamlessly with its non-blocking wire-speed architecture. Every port simultaneously supports up to 200Mbps of bandwidth, totaling 1Gbps of switching capacity. It minimizes bottlenecks, allowing your network to run smoothly even during the heaviest volume of traffic.


This Desktop Switch requires no configuration and installation is simple. Whether you are connecting the Desktop Switch to another switch or a computer, there is never a need for crossover cables with Auto-MDI/MDI-X support. Additionally, the Desktop Switch auto-senses if the network device it is connected to is running at 10Mbps or 100Mbps and adjusts accordingly. Equipped with a comprehensive LED display, you can monitor the status and activity of every port at a glance.

With outstanding performance, quality, and features packed in a compact sized device, the D-Link 5-Port 10/100Mbps Desktop Switch (DES-1105) is a great selection for expanding your home network.

Works with

Xtreme N Gigabit Router(D-Link DIR-655)

Connect any USB device AND give 4 of your favorite devices their own Gigabit Ethernet port – get comprehensive, high-performance wireless coverage to any device, anywhere in your home.

Tags: , ,

Feb 19

This part will clarify methods to connect Ethernet equipment for the brand new D-Link DES-1105 5-Port 10/100 Desktop Switch change and methods to mount the switch.


1.PC to DES-1105

A computer can be connected to the DES-1105 via a two-pair Category 3, 4, 5 UTP/STP Straight-Through or Crossover cable. A computer equipped with a RJ-45 10/100Mbps port can be connected to any of the five DES-1105 ports.
The LED indicators for the PC connection depend on the capability of the computer’s Ethernet card. If the LED indicators are not lit after making a proper connection, check the computer’s Ethernet card, the cable, and the DES-1105’s conditions and connections.

2.Hub/Switch to DES-1105

A hub (10 or 100BASE-TX) can be connected to the DES-1105 via a two-pair Category 3, 4, or 5 UTP/STP Straight-Through or Crossover cable. For 100Mbps operation a Category 5 cable must be used. The connection is accomplished from any port of the hub to any port of the D-Link DES-1105.

3.DES-1105 to Other Devices

The D-Link DES-1105 can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP Straight-Through or Crossover cable. A Category 5 (or higher) cable must be used for 100Mbps operation. The connection can be accomplished from any (MDI-X) port on the DES-1105 to any of the 10Mbps or 100Mbps (MDI-X) ports on another switch or other devices.

Tags: , ,