Apr 02

The Gaming (port forwarding) option allows you to open ports and forward them to an IP address on your LAN.

Step 1 Open a web browser and type the IP address of the D-Link gaming router in the address bar (default is 192.168.0.1). Press Enter.

Step 2 The default password is blank (nothing). Click Log In.

A10361_image1

Step 3 Click Advanced at the top and then click Gaming on the left side.

A10361_image2

Step 4 In the Add Game Rule section select Enable and configure the following:

  • Name – Enter a name to identify the rule or select one using the drop-down list to the right.

A10361_image3

  • IP Address – Enter the IP address of the computer on the LAN that traffic will be forwarded to.
  • TCP Ports to Open – Enter the TCP ports that you want to open
  • UDP Ports to Open – Enter the UDP ports that you want to open
  • Schedule – Select AlwaysA10361_image4

Step 5 Click Save to add the new rule.

Tags: ,

Oct 29

Some applications use a series of ports that change each time the application is used. Special Applications will open all ports for an application when a port is triggered.

Step 1: Open a web browser and type the IP address of the gaming router in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The default password is blank (nothing). Click Log In.

A10323_image1

Step 3 Click Advanced at the top and then click Special Applications on the left side.

Step 4 Pre-defined applications will be listed in the Application Level Gateway (ALG) Configuration section. To disable any of the pre-defined applications, uncheck them.

To add a Special Application rule select the Enable checkbox in the Add Special Applications Rule section and configure the following:

  • Name – Enter a name to identify the rule or select a rule using the drop-down list to the right.

A10323_image2

  • Trigger Port Range – Enter the port or a range of ports that will trigger the rule.
  • Protocol – Select the protocol (TCP, UDP, or Both).

A10323_image3

  • Input Port Range – Enter the LAN port or range of ports.
  • Input Protocol – Select the protocol for the LAN interface (TCP, UDP, or Both).

A10323_image4

  • Schedule – Select AlwaysA10323_image5

Step 5 Click Save to apply the new settings.

Tags: ,

Apr 22

1.How to view the wireless clients connected to D-Link DGL-4300 Gaming Router?

Step 1: Open a web browser and type the IP address of the DGL-4300 in the address bar (default is 192.168.0.1). Press Enter

Step 2: The default password is blank (nothing). Click Log In.

Step 3: Click Status at the top and then click Wireless on the left side.

DGL-4300A

This page will list any wireless clients connected to the DGL-4300 by MAC address and IP address.

2.How to enable email notification on my D-Link DGL-4100 or DGL-4300 router?

Step 1: Open a web browser and type the IP address of the gaming router in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The default password is blank (nothing). Click Log In.

Step 3: Click Tools at the top and then click Email on the left side.

Step 4: Select the checkbox next to Enable Email Notification and configure the following:
From Email Address – Enter the from email address. When you receive an email notification this will appear as the from address.
To Email Address – Enter the email address that you want email notifications sent to.
SMTP Server Address – Enter the address of your ISP´s SMTP server.*
Enable Authentication – Select this checkbox if your ISP requires SMTP authentication.*
Account Name – If your ISP requires SMTP authentication enter your username that you use to authenticate.*
Password – If your ISP requires SMTP authentication enter your password.*
Verify Password – Confirm the password you entered next to Password.

DGL-4300B

Step 5: To email the log when it is full select the checkbox next to On Full Log. To email the log on a schedule select the checkbox next to On Full and select the frequency next to Schedule.

Step 6: Click Save Settings at the top to apply the new settings.

Tags: , , ,

Aug 14

DDNS(Dynamic DNS) will allow you to access your public IP address by domain name. The DDNS feature updates your public IP address with the DDNS provider each time it renews.

Step 1 Register with one of the following DDNS providers. If you already have an account with a DDNS provider listed below, skip to Step 2.

  • ChangeIP.com
  • DynDNS.org
  • EuroDynDNS.org
  • hn.org
  • no-ip.com
  • ods.org
  • ovh.com
  • regfish.com
  • tzo.com
  • Step 2: Open a web browser and type the IP address of the D-Link gaming router in the address bar (default is 192.168.0.1). Press Enter.

    Step 3: The default password is blank (nothing). Click Log In.

    Step 4 Click Tools at the top and then click Dynamic DNS on the left side.

    gaming-router-ddns

    Step 5: Select the Dynamic DNS Enabled checkbox and configure the following:

    • Server Address – Select the DDNS provider that you registered with
    • Host Name – Enter the domain name that you registered (i.e. mydomain.provider.org)
    • Username or Key – Enter the username for your DDNS account
    • Password or Key – Enter the password for your DDNS account
    • Verify Password or Key – Confirm the password for your DDNS account
    • Timeout – Enter the timeout (in hours) in which the gaming router will update your DDNS account if your IP address has not changed

    Step 6: Click Save Settings at the top to apply the DDNS settings.

    Tags: , , ,

    Aug 11

    This article teaches you how to set the D-Link gaming router to configure WAN settings,Include PPPOE and DHCP .D-Link gaming router such as DGL-4100,DGL-4300 and DGL-4500.

    1.DHCP Case

    Step 1 Open a web browser and type the IP address of the gaming router in the address bar (default is 192.168.0.1). Press Enter.

    Step 2 The default password is blank (nothing). Click Log In.

    Step 3 Click WAN on the left side.

    dlink-pppoe1

    Step 4: In the Modes section configure the following:

    • WAN Mode – Select DHCP
    • Use these DNS Servers – Select this option to manually enter DNS servers. DNS servers translate domain names (i.e. dlink.com) to IP addresses (i.e. 64.7.210.130).
    • Primary DNS Server – If you selected Use these DNS Servers enter the domain name or IP address of your primary DNS server.
    • Secondary DNS Server – If you selected the Use these DNS Server enter the domain name or IP address of your secondary DNS server (optional).

    dlink-pppoe2

    Step 5: Click Advanced and configure the following:

  • MTU – The MTU (Maximum Transmission Unit) determines the largest packet size (in bytes). Contact your ISP for your MTU. Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for a PPPoE connection. If the MTU is set too high, packets will be fragmented downstream. If the MTU is set too low, the router will fragment packets unnecessarily and in some cases may be unable to establish connections.
  • Use the default MTU – Select this option to use the default MTU for your WAN connection type.
  • WAN Port Speed – It is recommended leaving this at the default value of Auto.
  • Respond to WAN Ping – Select this option if you want the WAN interface to respond to pings.
  • MAC Cloning Enabled – Select this option if you want to clone the MAC address of the WAN port with your computer.
  • MAC Address – If you selected the MAC Cloning Enabled option enter the MAC address or click Clone Your PC´s MAC Address to clone the MAC address of your PC.
  • Step 6: In the DHCP WAN Mode section enter a host name next to Host Name if this is required by your ISP.

    Step 7: Click Save Settings at the top to save the new settings.

    Step 8: Click Reboot Device.

    dlink-pppoe3

    Step 9: In the DHCP WAN Mode section click Renew next to DHCP Connection.

    You should now be able to connect to the Internet.

    2.PPPOE Case

    Step 1 Open a web browser and type the IP address of the gaming router in the address bar (default is 192.168.0.1). Press Enter.

    Step 2 The default password is blank (nothing). Click Log In.

    Step 3 Click WAN on the left side.

    Step 4 In the Modes section configure the following:

    dlink-pppoe4

    • WAN Mode – Select PPPoE
    • Use these DNS Servers – Select this option to manually enter DNS servers. DNS servers translate domain names (i.e. dlink.com) to IP addresses (i.e. 64.7.210.130).
    • Primary DNS Server – If you selected Use these DNS Servers enter the domain name or IP address of your primary DNS server.
    • Secondary DNS Server – If you selected the Use these DNS Server enter the domain name or IP address of your secondary DNS server (optional).

    Step 5 Click Advanced and configure the following:

    • MTU – The MTU (Maximum Transmission Unit) determines the largest packet size (in bytes). Contact your ISP for your MTU. Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for a PPPoE connection. If the MTU is set too high, packets will be fragmented downstream. If the MTU is set too low, the router will fragment packets unnecessarily and in some cases may be unable to establish connections.
    • Use the default MTU – Select this option to use the default MTU for your WAN connection type.
    • WAN Port Speed – It is recommended leaving this at the default value of Auto.

    Step 6 In the PPPoE WAN Mode section configure the following. If you are unsure about any of the below settings contact your ISP or network administrator.

    dlink-pppoe5

    • Username – Enter your username
    • Password – Enter your password
    • Verify Password – Confirm your password
    • Service Name – Enter a service name if required by your ISP
    • Reconnect Mode – Select Always On to keep a connection to the Internet, On demand to automatically connect whenever a request is sent to access the Internet, or Manual to connect manually.
    • Maximum Idle Time – Enter the maximum idle time (in minutes). The maximum idle time is the amount of time when there is no activity in which the Internet connection will disconnect. Enter 0 to always stay connected.

    Step 7 Click Save Settings at the top to save the new settings.

    Step 8 Click Reboot Device.

    Tags: , , ,

    css.php