Aug 27

Step 1

Plug the D-Link PowerLine AV Wireless N Extender (DHP-W306AV) into an AC wall outlet (Please do not plug into a power strip or surge protector) in the same room as your current existing Powerline network in order to verify whether your home’s electrical wiring is suitable for the PowerLine network. Turn on the PowerLine AV Wireless N Extender (DHP-W306AV) by pushing the power button located on the side of PowerLine AV Wireless N Extender (DHP-W306AV).

Note: Power source is confirmed when the green LED Power Indicator on the PowerLine AV Wireless N Extender (DHP-W306AV) is illuminated. Network Connectivity is confirmed when the green LED PowerLine indicator on both the DHP-W306AV and the Powerline device are illuminated.

Step 2

Connect the included Ethernet cable to the network cable connector located on the side of the PowerLine AV Wireless N Extender (DHP-W306AV) and attach the other end of the Ethernet cable to the PC.

Step 3

If you applied security on your other Powerline devices and you have plugged in your new D-Link PowerLine AV Wireless N Extender (DHP-W306AV), press the Simple Connect Button on the PowerLine AV Wireless N Extender (DHP-W306AV) for 2 seconds. Then, press the Simple Connect Button on any Powerline devices in your existing network for 2 seconds. This must be done within two minutes after pressing the Simple Connect Button on the PowerLine AV Wireless N Extender (DHP-W306AV).

d-link-DHP-W306AV-Install

Note: The PowerLine LED on both D-Link DHP-W306AV and PowerLine devices should blink. Network Connectivity is confirmed when the PowerLine LED indicator on both the DHP-W306AV and the Powerline device are illuminated.

Step 4

(One Touch AP Configuration: Apply the same wireless settings to the DHP-W306AV as your existing Wireless Router or Access Point) Press the WPS button on your existing Router or Access Point. The WPS LED will flash on and off. Then, press WPS Push Button on the DHP-W306AV and hold it for 5 seconds.

Step 5

(Follow if you would like to use the Wireless Settings for your PowerLine that are different from your Wireless Router or Access Point)

To Configure the PowerLine AV Wireless N Extender (DHP-W306AV), open a web browser, enter http://192.168.0.50 or http://dlinkap in the address field and then press Enter. When the login window appears, set the user name to Admin and leave the password box blank. Click Log In to continue the setup. Follow the wizard’s instruction to assist you in securing your DHP-W306AV wireless network. Please refer to the “Wireless Setup Wizard” in user manual for detailed installation information.

Step 6

Once network connectivity is confirmed, you can place the DHP-W306AV PowerLine AV Wireless N Extender in a different room of your home. The D-Link DHP-W306AV will retain the security settings even if they are unplugged.

Your Network Setup – PowerLine Adapter

d-link-DHP-W306AV-Install-1

d-link-DHP-W306AV-Install-2

Tags: , ,

css.php