Aug 29

Step 1: Log onto the D-Link DI-614+ configuration page (192.168.0.1 in your browser). Log in by entering your username into the login box (admin by default).

Step 2: Select the Status tab. Under Device Info, locate the LAN MAC address (Ethernet MAC). This is the address you will enter into the configuration of the D-Link DWL-900AP+. Make sure you write it down correctly.

Step 3: Click on the Home tab and select Wireless on the left pane. Write down the SSID.

Step 4: Log into the configuration page of the DWL-900AP+ (192.168.0.50 in your browser). Log in by entering your username into the login box (admin by default).

Step 5: Select the Advanced tab. Under Mode, select Wireless Client. In the Remote AP MAC box you will enter the LAN MAC address that you copied from the configuration of the D-Link DI-614+. When entering the MAC address, do not include colons (:) or dashes (-). Click on the Apply button to save your settings. Click Continue.

Step 6: Click on the Home tab and select Wireless on the left pane. Enter the SSID as it is on the DI-614+ (case-sensitive). Click Apply and then Continue.

Step 7: Turn the DI-614+ and the D-Link DWL-900AP+ off for a few seconds. Turn the D-Link DI-614+ on first, wait until the lights are steady, then turn the D-Link DWL-900AP+ back on.

Step 8: The DI-614+ and the DWL-900AP+ should now be able to communicate wirelessly, if not, then verify the LAN MAC address you entered into the DWL-900AP+ configuration is correct.

Note: When the DWL-900AP+ is in “client” mode, other wireless clients will not be able to connect to the D-Link DWL-900AP+.

Tags: , ,

Aug 29

Step 1. Create a Folder on the Desktop Screen:

From a blank spot the Desktop Screen, press and hold the Control key on the keyboard and click the mouse button. Release the Control key, click New Folder, and name it firmware.

Step 2. Retrieve Firmware from Website:

Click link below and download file to the folder created in step 1.

Download Di-614+ Firmware here

Step 3. Upgrade the Firmware:

A. From the Main Desktop Screen, launch Internet Explorer or Netscape.

B. Type 192.168.0.1 in the Address bar and click Go.

C. For the User ID, type admin and click OK.

D. Click Tools on the top and then click Firmware on the left side.

E. Click Browse>Desktop>firmware, double click D-Link di6xx_firmware_203.bin and click Apply. Wait for approx. 15 seconds or until the M2 light stops flashing on the DI-6xx unit then click Continue.

F. This takes you back to the Tools page. Check the Current Firmware Version on the Tools page to confirm that the firmware loaded successfully.

Tags: ,

Aug 07

This article is for the DI-514, DI-524, DI-614+, DI-624, DI-624S, and DI-714P+ Wireless Settings.

1.How to change the preamble on my DI series wireless router?

Step 1: Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 3: Click the Advanced tab and then click Performance to the left.

dlink-performance

Step 4: Select Short or Long next to Preamble Type. If you experience lock-ups when transferring large files, then select Short preamble. You must also match your other wireless devices with the same preamble setting.

Note: The preamble defines the length of the CRC block for communication between the wireless access point and the roaming wireless network adapters. CRC (Cyclic Redundancy Check) is a common technique for detecting data transmission errors.

2.How to change the SSID on D-Link wireless router?

Step 1: Open your web browser and type the IP address of the router in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (default password is blank).

Step 2: Click on the Home tab at the top of the configuration page and then click the Wireless button on the left side.

Step 3: Next to SSID, type in a new SSID.

The SSID (Service Set Identifier) is the workgroup name of your Wireless Network. All devices (access points, wireless routers, and wireless adapters) must have the same SSID to communicate on the Wireless Network. The SSID can be up to 32 numbers, letters, spaces, and dashes. Also, the SSID is case-sensitive.

dlink-changessid

Step 4: Click Apply and then click Continue to save your settings.

3.How to change the channel on DI series wireless router?

In the 802.11b/g (2.4Ghz) standard there are 11 channels (US) to choose from, all but three are overlapping channels. Channels 1, 6, and 11 are the only non-overlapping channels. The channels can be changed to avoid interference from other wireless devices that run on the 2.4 Ghz frequency range (I.E. 2.4Ghz cordless phones, bluetooth, and X-10).

Step 1: Open your web browser and type the IP address of the router in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (default password is blank).

Step 2: Click on the Home tab at the top of the configuration page and then click the Wireless button on the left side.

Step 3: Select a channel from the drop-down menu. For best results, use channel 1, 6, or 11.

dlink-changechannel

Step 4 Click Apply and then click Continue to save your settings.

Tags: , , , , ,

css.php