Select 6to4 from the My IPv6 Connection is drop-down menu if your D-Link Router will use an IPv6 to IPv4 tunnel to connect to the Internet.
WAN IPv6 Address Settings:
Enter the address settings supplied by your Internet provider (ISP).
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link‑Local Address:
Displays the Router’s LAN Link-Local Address.
LAN Address Autoconfiguration Settings:
Use this section to configure the IPv6 autoconfiguration settings.
IPv6 6to4- Stateless Autoconfiguration
To configure the Router to use an IPv6 to IPv4 tunnel stateless autoconfiguration connection, configure the parameters in the LAN Address Autoconfiguration Settings section as described below:
Enable Autoconfiguration:
Check to enable the Autoconfiguration feature.
Autoconfiguration Type:
Select the Stateless option from the drop-down menu.
Router Advertisement Lifetime:
Enter the Router Advertisement Lifetime (in minutes).
Click the Save Settings button to save any changes made.
IPv6 6to4- Stateful (DHCPv6) Autoconfiguration
To configure the Router to use an IPv6 to IPv4 tunnel stateful autoconfiguration connection, configure the parameters in the LAN Address Autoconfiguration Settings section as described below:
Enable Autoconfiguration:
Check to enable the Autoconfiguration feature.
Autoconfiguration Type:
Select the Stateful(DHCPv6) option from the drop-down menu.
IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes).
Click the Save Settings button to save any changes made.
IPv6 Link-local Only
Select Link-local Only from the My IPv6 Connection is drop-down menu if your Router will use the IPv6 link local method
to connect to the Internet.
LAN IPv6 Displays the LAN IPv6 Link-Local address of the router.
Address Settings