Oct 23

This video will teach you How to configure shareport mobile such as D-Link DIR-826L

Note: If using a D-Link Mobile router, SharePort Mobile is only compatible in Router and Wifi-Hotspot Mode

Note: In this example we are using the DIR-506L, however, these instructions can be used on any D-Link router that supports SharePort Mobile

Step 1: Insert your USB Flash Drive into your Router

Router Configuration

Step 2: Log into your router:

Open a web browser and enter the IP address of your router or enter http://dlinkrouter. in the address bar. By Default the IP address is 192.168.0.1

The default the username is admin and there is no password

A10074_image1

Step 3: Click on the Setup Tab and Click Storage on the left side

A10074_image2

Step 4: Check Enable SharePort Web Access and ensure Allow Remote Access is checked, Click Save Settings

A10074_image3

Mobile Setup

Step 5: Download the SharePort Mobile App from App Store (Apple/Android)

A10074_image4A10074_image5

A10074_image6

Step 6: Ensure your Mobile device is connected to the wireless signal of your SharePort Mobile supported router.

Step 7: Launch the SharePort Mobile App; The following screen will appear.

A10074_image7

Step 8: Click Settings

A10074_image8

Step 9: Click Edit and enter your username and password

Note: By default the username is set to admin with no password.

Step 10: Change the Port if required (by default it is configured at port 8181 within the router configuration

Note: If accessing content over the internet, enter the IP or Domain address of your router. if access locally, the IP will fill in automatically.

A10074_image9

SharePort Mobile is successfully configured and your USB media should now be accessible.

A10074_image10

Tags: , , ,

Feb 08

There are several connection types to choose from: Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6), PPPoE,IPv6 in IPv4 Tunnel, 6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider.

Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled.

Auto Detection

DIR-826L-IPv6a

Select Auto Detection to have the router detect and automatically configure your IPv6 setting from your ISP.

Static IPv6

DIR-826L-IPv6b

My IPv6 Connection:
Select Static IPv6 from the drop-down menu.

WAN IPv6 Address Settings:
Enter the address settings supplied by your Internet provider (ISP).

LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.

LAN Link-Local Address:
Displays the Router’s LAN Link-Local Address.

Enable Autoconfiguration:
Check to enable the Autoconfiguration feature.

Autoconfiguration Type:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.

IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers.

IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers.

IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes).

Autoconfiguration

DIR-826L-IPv6c

My IPv6 Connection:
Select Autoconfiguration (Stateless/DHCPv6) from the drop-down menu.

IPv6 DNS Settings:
Select either Obtain DNS server address automatically or Use the following DNS Address.

Primary/Secondary DNS Address:
Enter the primary and secondary DNS server addresses.

LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.

LAN Link-Local Address:
Displays the Router’s LAN Link-Local Address.

Enable Autoconfiguration:
Check to enable the Autoconfiguration feature.

Autoconfiguration Type:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.

IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers.

IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers.

IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes).

Tags: , , , ,

Jan 27

On this page, the user can configure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard on D-Link Wireless N 600 Dual Band Gigabit Cloud Router DIR-826L

Click the IPv6 Internet Connection Setup Wizard button and the router will guide you through a few simple steps to get your network up and running.

DIR-826L-IPv6-Internet1

Click Next to continue to the next page. Click Cancel to discard the changes made and return to the main page.

DIR-826L-IPv6-Internet2

The D-Link DIR-826L router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found.

DIR-826L-IPv6-Internet3

However, if the automatic detection fails, the user will be prompt to either Try again or to click on the Guide me through the IPv6 settings button to initiate the manual continual of the wizard.

DIR-826L-IPv6-Internet4

There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider.

Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. The 3 options available on this page are IPv6 over PPPoE, Static IPv6 address and Route, and Tunneling Connection.

Choose the required IPv6 Internet Connection type and click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page.

DIR-826L-IPv6-Internet5

IPv6 over PPPoE

After selecting the IPv6 over PPPoE option, the user will be able to configure the IPv6 Internet connection that requires a username and password to get online.Most DSL modems use this type of connection.

The following parameters will be available for configuration:

DIR-826L-IPv6-Internet6

PPPoE Session: Select the PPPoE Session value used here. This option will state that this connection shares it’s
information with the already configured IPv6 PPPoE connection, or the user can create a new PPPoE connection here.

User Name: Enter the PPPoE username used here. If you do not know your user name, please contact your ISP.

Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP.

Verify Password: Re-enter the PPPoE password used here.

Service Name: Enter the service name for this connection here. This option is optional.

Static IPv6 Address Connection

This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all this information.

DIR-826L-IPv6-Internet7

Use Link-Local Address:

The Link-local address is used by nodes and routers when communicating with neighboring nodes on the same link.
This mode enables IPv6-capable devices to communicate with each other on the LAN side.

IPv6 Address:

Enter the WAN IPv6 address for the router here.

Subnet Prefix Length:

Enter the WAN subnet prefix length value used here.

Default Gateway:

Enter the WAN default gateway IPv6 address used here.

Primary IPv6 DNS Address:

Enter the WAN primary DNS Server address used here.

Secondary IPv6 DNS Address:

Enter the WAN secondary DNS Server address used here.

LAN IPv6 Address:

These are the settings of the LAN (Local Area Network)IPv6 interface for the router. The router’s LAN IPv6 Address
configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.)

Tags: , , , , ,

Jan 27

If you would like to access your files that are on your USB thumb drive or external hard drive that is connected to your DIR-826L router, follow the steps below:

DIR-826L-Access-Files

Step 1 – Enable Web File Access

Check the Enable Web File Access checkbox to enable. Then select if you want to use HTTP or HTTPS (secure) and enter the port(s) you want to use. The default for HTTP is 8181 and HTTPS is 4433.

Step 2 – Create a User Account

Under User Creation, enter a username and password, and then click Add/Edit.

Step 3 – Configure your Access Path

Under User List, click the Modify icon for the user you just created.Here you can browse to the folder on your USB storage device you want to assign the Access Path to.

Step 4 – Save Settings

If you want to add more users, repeat steps 3 and 4. Once you are finished, click the Save Settings button at the top to save your settings.

Note that under the HTTP Storage Link (at the bottom) will display the URL(s) you can use to connect. Also if you selected HTTPS, you must type in HTTPS:// instead of HTTP:// to get a secure connection.

For example, if you selected HTTPS and changed the port to 3200, and your WAN IP address is 1.2.3.4, then you would enter HTTPS://1.2.3.4:3200 to connect.

Tags: , ,

Jan 27

If this is your first time installing the router, open your web browser. You will automatically be directed to the Wizard Setup Screen.

dlink-DIR-826L-Quick-Setup-Wizard1

If this is your first time logging into the router, this wizard will start automatically.

This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue.

dlink-DIR-826L-Quick-Setup-Wizard2

Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password.

dlink-DIR-826L-Quick-Setup-Wizard3

If the router does not detect a valid Ethernet connection from the Internet port, this screen will appear. Connect your broadband modem to the Internet port and then click Try Again.

dlink-DIR-826L-Quick-Setup-Wizard4

If the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide me through the Internet Connection Settings to display a list of connection types to choose from.

dlink-DIR-826L-Quick-Setup-Wizard5

Select your Internet connection type and click Next to continue.

dlink-DIR-826L-Quick-Setup-Wizard6

If the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue.
Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.

dlink-DIR-826L-Quick-Setup-Wizard7

If the router detected or you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue.

dlink-DIR-826L-Quick-Setup-Wizard8

If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue.

dlink-DIR-826L-Quick-Setup-Wizard9

If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue.

dlink-DIR-826L-Quick-Setup-Wizard10

For both the 2.4GHz and 5GHz segments, create a wireless network a name (SSID) using up to 32 characters.

Create a wireless security passphrase or key (between 8-63 characters).Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network.Click Next to continue.

dlink-DIR-826L-Quick-Setup-Wizard11

In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue.

dlink-DIR-826L-Quick-Setup-Wizard12

Select your time zone from the drop-down menu and click Next to continue.

dlink-DIR-826L-Quick-Setup-Wizard13

The Setup Complete window will display your wireless settings. Click Save and Connect to continue.

dlink-DIR-826L-Quick-Setup-Wizard14

If you want to create a bookmark to the router, click OK. Click Cancel if you do not want to create a bookmark.

dlink-DIR-826L-Quick-Setup-Wizard15

If you clicked Yes, a window may appear (depending on what web browser you are using) to create a bookmark.

dlink-DIR-826L-Quick-Setup-Wizard16

To use the mydlink service (mydlink.com or the mydlink Lite app), you must have an account. Select if you do have a mydlink account or if you need to create one. Click Next to continue.If you do not want to register at this time, click Cancel.

dlink-DIR-826L-Quick-Setup-Wizard17

If you clicked Yes, enter your mydlink account name (email address) and password. Click Login to register your router.

dlink-DIR-826L-Quick-Setup-Wizard18

If you clicked No, fill out the requested information and click Next to create your mydlink account.

dlink-DIR-826L-Quick-Setup-Wizard19

Once your account information is entered, click Login.

dlink-DIR-826L-Quick-Setup-Wizard20

Tags: , , , ,



 
1 2 Next
css.php