Dec 23

NOTE: This example shows the setup of the D-Link DIR-L1900 using Android OS. Apple/iOS setup should be the same/similar.

 

Step 1: Download and install the D-Link Wi-Fi app on your Android OS/Apple iOS device.

 

 

Step 2: Launch the D-Link Wi-Fi app, and tap Install New Device.

 

 

Step 3: Tap Scan the QR code, then scan the QR code that can be located on the bottom of the router or on the quick install card.

 

 

Step 4: This unit has router and extender mode, in this example we will configure it as a router. Tap SELECT.

 

 

Step 5: Unplug the power to your modem or gateway, then tap NEXT.

 

NOTE: Make sure all lights are off on the modem, if not then you may need to remove the battery from the modem.

 

 

Step 6: Connect the Ethernet cable from your modem/gateway into the Internet port on the DIR-L1900.

 

– Tap NEXT

 

 

Step 7: Power the modem/gateway back on and wait for it to start up, then tap NEXT.

 

NOTE: If you removed the battery from your modem, re-insert it before powering the modem back on.

 

 

Step 8: Power the DIR-L1900 on, then tap NEXT.

 

NOTE: The LED will be red at first, and then will start  flashing orange when the unit is ready for setup. If the LED is not lit make sure you press the power button.

 

 

Step 9: When the device LED starts blinking orange, then tap NEXT.

 

 

Step 10: Here you can specify what wireless network name your DIR-L1900 will broadcast. Enter a new network name, then enter a new wireless password, then tap NEXT.

 

 

Step 11: Create a device admin password, then tap NEXT.

 

 

Step 12: Select the option to keep your device up to date, then tap NEXT.

 

 

Step 13: Tap SAVE, the router will now save your changes.

 

 

Step 14: If you would like to link the DIR-L1900 to Google Assistant, Amazon Alexa or IFTTT, then tap Register (Optional). Or tap Not Now.

 

NOTE: In this example we selected Not Now,

 

 

Step 15: Tap FINISH.

 

Tags: ,

css.php