D-LinkQuick Manual Installation
Remove the top cover of your device by pressing the push button in and then lift the cover up.
Attach the strap to your hard drive(s) with the supplied screws.
Insert one or two 3.5” SATA hard drive(s) into the drive bay until they are firmly seated. Then, re-attach the top cover.
Plug an Ethernet cable to the Ethernet port on the back of the device and plug the other end to your network via a router or switch, or directly to a computer for configuration.
Connect the power adapter to the device and then connect the other end into a power outlet or surge protector. Press the power button on the front of the device to turn the device on.
Open a web browser and enter the IP address of the D-Linkto access the Web UI. If you have a DHCP-enabled router on your network, you may need to check the DHCP table to see what IP address the was assigned.
Note: The computer used to access the ShareCenter® web-based configuration manager must be on the same subnet as the ShareCenter®.
If your network is using a DHCP server and the computer receives IP settings from the DHCP server, the ShareCenter® will automatically be in the same subnet.
Select System Administrator and click the Login button (leave the password blank by default). Once you are logged in, click Management and then click Setup Wizard. Follow the on-screen instructions to configure your D-Link DNS-320L.
Note: Please refer to the manual for more information.