Aug 22

Step 1: Open a web browser and type the IP address of the DWL-1700AP in the address bar (default is wireless and wired). Press Enter.

Step 2: The default username is admin (all lower case) and the default password is root (all lower case). Click OK.

Step 3: Click the Home tab and then click DHCP to the left.


Note: If you are connecting to a DHCP server, the DHCP server on the D-Link DWL-1700AP should be disabled.

Step 4: By default, DHCP Server is set to Disabled. To enable it, click Enable using the radio buttons. To disable it, click Disable using the radio buttons.

Step 5: Enter the default gateway, net mask, and the starting and ending IP address in the corresponding fileds. To change the lease time, select a value using the drop-down list next to Lease Time.

Note: The value for DHCP Start IP must be less than the value for DHCP End IP.

Step 6: Click on Apply then click Continue to save your settings.

Tags: ,