This article teach you how to config awith a .
Step 1: Upgrade the firmware on theto the latest version.
Step 2: Download and install the latest Smart WLAN Manager software.
Step 3: Connect theinto the DES-1228P (make sure the power and LAN LED turn on).
Step 4: Run the Smart WLAN Manager software. Click on the Discover Wizard button on the top left corner if the software doesn’t detect the DWL-3140AP right away.
Step 5: Enter the DHCP IP pool range and then click on Add.
Step 6: Select the discovered DWL-3140 and click on Save.
Step 7: Right click on the access point you wish to setup and select Configuration. This is where you can configure the basic settings such as the IP address and SSID.