Nov 12

You will need the MAC address of the remote AP to configure your wireless bridge.

Step 1: Connect the D-Link DWL-3200AP to your PC using an Ethernet cable. Your computer will need to be in the same IP address range as the DWL-3200AP for configuration. The default IP address is

Step 2: Open a web browser and enter in the IP address of the access point ( The username is admin (all lower case) and the password is blank (nothing).


Step 3: Click on the Home tab and then click on Wireless on the left side. For Mode, select WDS. You can also select WDS with AP if you would like to create a wireless bridge and keep the AP functionality. Enter the Remote AP MAC Address(IE 50:23:AB:D4:56:E1). Click Apply to save your settings.

Step 4: Repeat the instructions for the remote access point. Click Apply to save your settings.

Note: If you have encryption enabled, ensure the key matches on both access points. Also, ensure that both access points do not have the same IP address. By default, the IP address is

Tags: , ,