Step 1 Log into the web-based configuration by opening up a web browser and typing in the IP address of the access point (192.168.0.50).
Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK.
Step 3 Click on the Advanced tab and then click Encryption on the left hand side.
Step 4 Click on the WPA radio button and then click Apply.
Step 5 Select PSK and then enter a key (passphrase). The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. Keep the Group Key Update Interval set to 1800.
Step 6 Click on the Apply button to save your settings.
Note: If you are configuring your access point from a wireless adapter, you will lose connectivity as soon as you click Apply. You must enable WPA-PSK on your adapter and enter the same exact key as you entered on your access point.
Tags: Access Point, DWL-7100AP, WPA-PSK
Step 1: Open your web browser such as Internet Explorer and enter the IP address of the D-Link DWL-7100AP access point in the Address bar and press Enter. The default IP address is 192.168.0.50.
Step 2: Enter your user name (admin) and your password (leave blank by default). Click OK.
Step 3: Click the Advanced tab and then click Grouping on the left side.
Step 4: Next to Load Balance, select Enabled from the drop-down box.
When you Enable Load Balance you allow several D-Link DWL-7100AP/DWL-7000AP access points to balance wireless network traffic and wireless clients among the access points with the same SSID. All the APs that share Load Balancing must have the same SSID. Assign each Access Point a different non-overlapping channel (e.g., 1, 6, 11).
Step 5: Next to Link Integrate, select Enable from the drop-down box.
When Link Integrate is Enabled, the wireless segment associated with the AP will be disconnected whenever the connection between the AP and the LAN is dropped.
Step 6: Click Apply and then click Continue to save your settings.
Tags: DWL-7100AP, Grouping Settings
To change or obtain an IP address automatically for the D-Link DWL-7100AP follow the steps below:
Step 1: Open your web browser and type the IP address of the access point in the address bar. The default IP address is 192.168.0.50. At the login, enter your username (admin) and password (default password is blank).
Step 2: Click on the Home tab and then click LAN.
Step 3: Select Dynamic (DHCP) from the drop-down list if you want the access point to receive an IP address automatically from a DHCP server or router, otherwise change the IP address manually (static).
We strongly suggest using a static IP address. The IP address is not used for networking, only for configuration. Make sure the IP address is within the same IP range as your network.
Step 4: Click the Apply button and click Continue to restart the access point.
Tags: Access Point, DWL-7100AP, IP address
You can change the user name and password within the web-based configuration utility that is built-in to the access point.
Step 1: Open your web browser such as Internet Explorer. Enter the IP address of the D-Link access point (default is 192.168.0.50) and press Enter.
Step 2: Enter your username (admin) and your password (leave blank by default). Click OK.
Step 3: Click on the Tools tab at the top and then click Admin.
Step 4: Enter your new user name and then enter the old password (if any). Enter your new password and click Apply. After the access point restarts, you will be required to enter your new user name and password.
Tags: DWL-2100AP, DWL-2200AP, DWL-7100AP, password
Super G is Atheros’ proprietary frame-bursting, compression and channel bonding technology to improve IEEE 802.11g wireless LAN performance. The throughput transmission speed limit when using Super G is claimed to be up to 40Mbit/s-60Mbit/s at a 108Mbit/s signaling rate, which is achieved through the bonding of two 54Mbit/s 802.11g channels. Read More…
Step 1: Open your web browser and type the IP address of the D-Link DWL-7100AP access point in the address bar. The default IP address is 192.168.0.50. At the login, enter your username (admin) and password (default password is blank).
Step 2: Click on the Advanced tab and then click Performance on the left side.
Step 3: Next to Super Mode, select the mode you would like to use from the drop-down menu.
- Super G without Turbo
- Super G with Dynamic Turbo
- Super G with Static Turbo
Step 4: Click Apply and then click Continue to save your settings.
Tags: DWL-2100AP, DWL-2200AP, DWL-7100AP, Super G