Sep 10

Hardware Overview LEDs


Diag. -The light will blink during boot up system auto-check.Once the access point is ready, the light will be off.

5 GHz – When lit, the access point is operating at 5GHz. This light will blink when there is wireless traffic.

2.4 GHz – When lit, the access point is operating at 2.4GHz.This light will blink when there is wireless traffic.

LAN1, LAN2 – Solid light when the Ethernet port is connected to a working port, such as a router or switch. The light will blink
when there is traffic through LAN port.

POWER – The light will blink during boot up. Once solid, the access point is ready.

Installing the Hardware


You may power the access point using one of the following methods.

1. Use the power adapter included in the package

2. Connect the access point to an external power-over-Ethernet (POE) switch


You may configure the access point using one of the following methods.

1. Directly connect the access point to a computer. You may then configure the access point through its graphical user interface (GUI).

2. Connect the access point to your computer using the included console cable. You may then configure the access point through its command
line interface (CLI)

Mounting Plate Assembly

Step 1: Insert the provided wall anchors in the wall where the mounting plate will be attached.


Step 2: Use the provided screws to secure the mounting plate on the wall.


Step 3: Attach the remaining screws securely to the back of the D-Link DWL-8610AP.


Step 4: Attach the DWL-8610AP to the mounting plate.


Step 5: Slide the DWL-8610AP down into the grooves on the mounting plate to secure it to the plate.


Tags: , , , ,

Sep 10

D-Link DWL-8610AP Combines Wireless Speeds of 802.11ac Technology with Flexibility and Scalability of D-Link’s Unified Wireless Solution

D-Link recently announced the DWL-8610AP, a new high power, 802.11ac unified wireless access point. Rich with advanced radio management and security features, the DWL-8610AP allows IT professionals to get the most of their wireless network and maximize their users’ experience.


The D-Link DWL-8610AP delivers reliable, high-speed wireless performance using the latest 802.11ac standards, with maximum wireless signal rates of up to 450 Mbps using the 2.4 GHz band, and 1300 Mbps using the 5 GHz band1. It supports impressive device densities and offers optimal range and coverage over both bands.

“Our students and faculty access our wireless network with a variety of devices, including laptops, tablets and smartphones,” said Kevin O’Neill, technology director, Gretna Public Schools in Gretna Nebraska. “As we continue to scale our network, the DWL-8610AP with 802.11ac technology allows us to handle these increasing demands and connect more users and more devices.”

The DWL-8610AP is easy to install and can be powered using the included AC to DC adapter, or directly through the network cable using Power over Ethernet from any switch or midspan injector that supports IEEE 802.3at.


“Wireless users in schools and businesses expect connectivity and bandwidth – it’s all about performance,” said Steven Olen, director of product marketing, D-Link Systems, Inc. “Our Unified Wireless systems maximize user experience and help achieve this via seamless roaming, load balancing, and other advanced RF management features.”

About the DWL-8610AP

Versatile and powerful, the DWL-8610AP can be flexibly deployed as an autonomously managed, standalone wireless access point, or as a centrally managed access point controlled by a D-Link Unified Wireless Switch or Wireless Controller. Businesses can start with standalone mode deployment and then migrate to a centrally managed system anytime later.

An important benefit to a centrally managed wireless network is proper RF management. When a number of access points are deployed close to each other, interference may result. The DWL-8610AP will sense a neighbor nearby and automatically select a non-interfering channel, greatly reducing RF interference and allowing administrators to deploy APs more densely. When a nearby AP is operating on the same channel, the DWL-8610AP will minimize interference by automatically lowering its transmission power. At any time should a nearby AP drop from the network, the DWL-8610AP will increase its transmission power to expand coverage.

Additional benefits include:

  • Band Steering: detects and steers 5 GHz capable clients away from the overcrowded 2.4 GHz network to the less congested 5 GHz network.
  • Load balancing: ensures maximum performance by limiting the maximum number of users per access point.
  • Beamforming technology: enables even greater reach. By focusing the wireless signal at connected devices, it guarantees continuous fast wireless speeds, even under heavy network utilization or in areas that have bad wireless signal.
  • Plenum-rated chassis: adheres to strict fire regulations for placement in air passageways.
  • Limited Lifetime Warranty: carries a Limited Lifetime Warranty, furthering D-Link’s commitment to product quality and long-term customer confidence.


The new D-Link DWL-8610AP unified wireless access point is currently shipping through D-Link’s vast network of channel partners, including value-added resellers and distributors and online retailers. For more information, visit

Tags: , ,