Dec 29

This FAQ is for the D-Link DNS-321, DNS-323, DNS-343, or DNS-726-4 Storages.

Dynamic DNS (DDNS) allows remote administration of the unit or FTP access using a domain name in situations where a static IP address is not available. Each time a new dynamic IP address is pulled, the the Unit updates the IP address with the DDNS service provider.

Step 1: Register with one of the following DDNS providers:

Write down the URL and login information you obtained after registering with one of the above DDNS providers.

Step 2: Log into the web-based configuration of the NAS or NVR.

Step 3: Click the Setup or Tools tab and then click Dynamic DNS or DDNS to the left.

A10177_image1

A10177_image2

Step 4: Click the Enable DDNS checkbox.

Step 5: Select the provider that you registered with from the drop-down list next to Server Address.

Step 6: Using the information you obtained in Step 1 enter the domain name that you created (i.e. mynas.dyndns.org) in the field by Host Name. Enter your login information for the account in the Username/Key,Password/Key, and verify Password/Key fields.

Step 7: Click Save Settings to save the new settings.

Note: After this is set up, you use the domain name that you registered to access the NAS or NVR remotely. For example, if the domain name that you registered is mynas.dyndns.org, then you would typehttp://mynas.dyndns.org in the address bar of your internet browser to access the camera remotely.

Tags: , ,

Dec 03

Dynamic DNS (DDNS) allows remote administration of the unit or FTP access using a domain name in situations where a static IP address is not available. Each time a new dynamic IP address is pulled, the the Unit updates the IP address with the DDNS service provider.

Step 1: Register with one of the following DDNS providers:

Write down the URL and login information you obtained after registering with one of the above DDNS providers.

Step 2: Log into the web-based configuration of the D-Link ShareCenter Pro

Step 3: Click the Network Services and then click Dynamic DNS

A10123_image1

Step 4: Click the Enable DDNS checkbox.

Step 5: Select the provider that you registered with from the drop-down list next to Server Address.

Step 6: Using the information you obtained in Step 1 enter the domain name that you created (i.e. mynas.dyndns.org) in the field by Host Name. Enter your login information for the account in the Username/Key,Password/Key, and verify Password/Key fields.

Step 7: Click Apply to save the new settings.

Tags: , ,

Nov 20

D-Link DNS-320 LAN Setup

The LAN Settings allows you to enable LLTD and to configure the Link Speed and the IP address as a DHCP client or Static IP.

IP Settings

DHCP Client:Selecting DHCP Client will cause the DNS-320 to obtain an IP address from the local DHCP server.

Static IP: Selecting Static IP requires you to assign the IP information for the DNS-320 manually.

IP Address: Enter an IP address for your device. The IP address of each device on the local area network must be within the same IP address range and subnet mask.

Subnet Mask: Enter the Subnet Mask. The default subnet mask is 255.255.255.0.

Gateway IP Address:Enter the Gateway IP Address for the device. The Gateway IP Address is almost always the LAN address of your router. Most D-Link routers have a default LAN IP address of 192.168.0.1.

DNS1/ DNS2: Specify the first and second DNS Addresses for the device. The first DNS address is usually the LAN address of your router. A DNS Address will allow the device to resolve names into IP addresses. Click Save Settings when finished.

Link Speed and LLTD Settings

Speed: Displays the current Ethernet bit rate in Megabits per second.

Link Speed: Select either Auto (Auto-Negotiate), 100 Mbps, or 1000 Mbps by clicking the appropriate radio button.
Then click the Save Settings button to save the new settings.

LLTD: The device supports LLTD (Link Layer Topology Discovery) and is used by the Network Map application that is included in Windows Vista® and Windows® 7. Select to enable or disable LLTD.

D-Link DNS-320 Dynamic DNS

The DDNS feature allows the user to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased.(www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing)IP addresses. Using a DDNS service provider, your friends can enter your domain name to connect to your server regardless of your IP address.

DDNS Settings

DDNS: Select Enable or Disable.
Server Address: Select a DDNS Server from the combo box on the right hand-side, or type in the server address manually.
Host Name: Enter your DDNS host name.
Username or Key: Enter your DDNS username or key.
Password or Key: Enter your DDNS password or key.
Verify Password or Key: Re-enter your password or key.
Status: Displays your DDNS status.

When the user clicks on the “Sign up for D-Link’s Free DDNS service at www.DLinkDDNS.com” link, the user will be re-directed to the D-Link DDNS page.

Here the user can create or modify a D-Link DDNS account to use in this configuration.

Tags: , , , , ,

css.php