Nov 13

To setup the Hard Drive RAID configuration of your ShareCenter Pulse, click on the Management tab and then the Disk
Management icon. Select the Hard Drive Configuration menu item on the left of the window. This menu will allow you set the RAID type and format your hard drives.

When you click the Set RAID type and Re-Format button in the Disk Management-Hard Drive Configuration menu, a wizard will launch allowing you to format your drives and create the RAID format. The following is an example of a RAID1 configuration:

1.Initially the steps of the configuration process are shown. You must decide on the RAID type you would like to format your HDDs with. Click the Next button to continue or click Exit to cancel.

2.This screen displays the currently installed HDD information. Any data on the installed hard drives will be lost by the formatting. Click Next to continue.

3.Select the format desired by clicking on the RAID type box to highlight it in blue. In this example the maximum data protection option of RAID 1 is selected. Click Next to continue.

4.If you select a RAID 0 or 1 option then you need to determine the size of the RAID volume. Any extra space will be formatted as a JBOD volume. Click Next to continue.

Note: If you select Leaving the remaining disk space for future, you can format the JBOD partition at a later time.

5.A Volume Configuration Summary is displayed. Check the table and click Next to format the drives. Otherwise click the Previous button to make changes to your configuration or click Exit to end the wizard.

Tags: , ,

css.php