Jan 29

D-Link DIR-412 Hardware Overview:

DIR-412-Hardware-1

1.Mode Switch
Use this switch to change between WAN mode and 3G Router mode.

2.Ethernet Port
In WAN mode the Ethernet port is used to connect to your WAN connection. In 3G mode the Ethernet port is used to connect to your LAN connection.

3.Power Receptor
Receptor for the supplied power adapter.

4.Reset
Pressing the Reset button restores the router to its original factory default settings.

DIR-412-Hardware-2

1.Power LED
Lights orange during bootup. Lights green when D-Link DIR-412 router has booted up. A solid green light indicates a proper connection to the power supply. If the LED blinks orange the system has failed.

2.Internet LED
A solid green light indicates a successful 3G connection. A solid orange light indicates a 3G error, a WAN failure, or a system failure. A blinking green light indicates that the WAN connection is enabled when the Router is operating in WAN mode.

3.WLAN LED
A solid green light indicates that the wireless segment is ready. This LED blinks during wireless data transmission.

4.Ethernet LED
A solid green light indicates that a link has been established. This LED blinks during data transmission.

5.WPS Button
Press the WPS button for 1 second to initiate the WPS process. The button will flash blue while a WPS connection is being established. The button will light blue for 120 seconds (2 minutes) if a successful WPS connection has been made.

6.3G USB Connection
Connect your 3G USB adapter to this port if you want to use a 3G Internet connection.

Tags: ,

css.php