Aug 25

D-Link’s DSL-2680 Wireless N 150 ADSL2+ Modem Router is the ideal Internet gateway for ADSL subscribers with basic Internet requirements. The DSL-2680 connects directly into the phone line to provide up to 24 Mbps download speed. The embedded Wireless N 150 technology with up to 150 Mbps makes it suitable for light Internet usage like browsing, emailing, banking and shopping.

This article describes the configuration of the ADSL D-Link DSL-2680R a great modem / router product from D-Link which offers many attractive features such as support for ADSL Mbps downstream and up to 24 1 Mbps upstream (ADSL2 + Standards), the wireless until 54 Mbps and swiches to 4 Ethernet ports integrated 10 / 100;

connect the D-Link DSL-2680R as described below:

  • Connect the power adapter to the connector on the rear panel of the device D-Link DSL-2680R and to the power outlet. The Power LED lights up.
  • Insert one end of the Ethernet cable to the Ethernet port on the rear panel of the D-Link DSL-2680R and the Ethernet port of your computer.
  • Open your browser (Internet Explorer, Mozilla, Firefox, Google Chrome, Safari, Opera) and enter the address Ip the modem in the address bar:

After clicking on “ENTER” or “SEARCH” will appear in the login window: inverire as username e password admin

This will open the HOME where we’re going to click on “Run Wizard“If we follow the Easy Setup, otherwise remaining in theADSL SETUP ——–> SETUP

we can move the bottom of the page and click on MANUAL SETUP

Now we can fill the screen shown below according to the configuration parameters suggested by our ISP

if you do not remember what are you going next article Configuration Parameters

At the end we save the configuration that we have created;

at this point the D-Link DSL-2680R perform by itself is saving the reboot connecting directly to the Internet;

we open our favorite browser and start surfing: the configuration is finished.

Tags: , ,

Dec 02

This feature behaves as a router in areas where you cannot take your home router so that you may wirelessly connect to the internet.

1.Scan the QRS Mobile code to download “QRS Mobile” App from the App Store to your iPhone or iPad. You can also search “QRS Mobile” from the App Store.

D-Link DIR-505-Router Mode-Setup

2.Move the switch on the D-Link DIR-505 to “Router/AP Mode” and plug it into a wall outlet. From your iOS mobile device,click Settings. Then, click Wi-Fi.

D-Link DIR-505-Router Mode-Setup-2

3.Wireless Utility to displays the available wireless networks and select the Wi-Fi name that is shown on your companion card (ex: dlink-a8fa). Then, enter the Wi-Fi password included in your card (ex:akbdj19368).

D-Link DIR-505-Router Mode-Setup-3

4.Once it connected, click on the QRS Mobile icon from your iOS mobile device. Then click Start to continue.

D-Link DIR-505-Router Mode-Setup-4

5.Please follow the on-screen instructions to complete the setup.

D-Link DIR-505-Router Mode-Setup-5

6.Once the screen appears, you have successfully completed the setup. Please click Save and write down the Wi-Fi Name (SSID) and password on your companion card for future reference.

D-Link DIR-505-Router Mode-Setup-6

7.From your iOS mobile device go to your wireless utility to display the available wireless networks and select the network that you created for internet access.

D-Link DIR-505-Router Mode-Setup-7

Tags: , , , , ,

Mar 06

1.Virtual Server Configuration

The D-Link DIR-601 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network).

The D-Link DIR-601 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DIR-601 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the D-Link DIR-601 redirects the external service request to the appropriate server within the LAN network.

The D-Link DIR-601 is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a different port on the server computer.


Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service.

This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.



Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields.

IP Address:

Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name” drop-down menu. Select your computer and click <<. Private Port/Public Port: Enter the port that you want to open next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network. Protocol Type: Select TCP, UDP, or Both from the drop-down menu. Protocol Type:Select TCP, UDP, or Both from the drop-down menu. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page.


The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.

2.DDNS Configuration

The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased ( with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is.


Enable DDNS: Check to enable DDNS.

Server Address:Choose your DDNS provider from the drop down menu.

Username or Key:Enter the Username for your DDNS account.

Password or Key:Enter the Password for your DDNS account.

Timeout:Enter a time (in hours).

Status:Displays the current connection status to your DDNS server.

Tags: , , ,

Feb 06

Note:Do NOT upgrade firmware on any D-Link product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.

D-Link DIR-601 Wireless N 150 Home Router firmware upgrade:

The Latest Version: 1.02NA

Date: 2/24/2011

Revision Info:

¤ SMTP server port should set 25 by default in email settings page.
¤ DHCP lease time should set 1440 by default in network settings page.
¤ Compliant with DNSSEC.
¤ Fixed bug: Countdown string only lan change.
¤ WPS feature moved to advanced page.
¤ Change WEP KEY settings (from 4 keys to 1 key).
¤ Fixed advanced dns description error on wan_static.asp

Download Site:

Tags: , ,

Oct 20

On this page the user can configure the Wireless settings for this device.There are 3 ways to configure Wireless using DIR-645router. Firstly, the user can choose to make use for the quick and easy Wireless Connection Setup Wizard. Secondly, the user can choose to make use Wi-Fi Protected Setup. Lastly, the user can configure the Wireless settings manually.


Wireless Settings: Wireless Connection Setup Wizard

The Wireless Connection Setup Wizard is specially designed to assist basic network users with a simple, step-by-step set of instructions to configure the wireless settings of this router. It is highly recommended to customized the wireless network settings to fit into your environment and to add higher security.

To initiate the Wireless Connection Setup Wizard click on the Wireless Connection Setup Wizard button.


Step 1: In this step, the user must enter a custom Wireless Network Name or SSID . Enter the new SSID name in the appropriate space provided. Secondly the user can choose between two wireless security wizard configurations. The user can select ‘Automatically assign a network key’, by which the D-Link DIR-645 router will automatically generate a WPA/WPA2 pre-shared key using the TKIP and AES encryption methods; or the user can select ‘Manually assign a network key’, by which the user
will be prompt to manually enter a WPA/WPA2 pre-shared key using the TKIP and AES encryption methods.

Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page.


Step 2: This step will only be available if the user selected ‘Manually assign a network key’ in the previous step. Here the user can manually enter the WPA/WPA2 pre-shared key in the Wireless Security Password space provided. The key entered must be between 8 and 63 characters long. Remember, this key will be used when wireless clients wants to connect to this device. So please remember this key to prevent future troubleshooting.


Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page.

Setup Complete: On this page the user can view the configuration made and verify whether they are correct.

Click on the Prev button to return to the previous page. Click on the Cancel button to discard the changes made and return to the main wireless page. Click on the Save button to accept the changes made.


After click the Save button the device will save the settings made and return to the main wireless page.


Tags: , ,

1 2 Next