Apr 08

The tollowing chart contiains the different status for the LED indicator on the D-Link DCH-S150 Wi-Fi motion sensor:

 

WPS Blinking Green Press for one second to start the WPS connection process. The Power/Status LED will start to blink green.
Reset Solid Red Press and hold until the Status LED turns red in order to reset the device back to the factory default settings (for about 10 seconds).
Power/Status LED Solid Green The DCH-S150 is successfully connected to your network.
Blinking Green The WPS process is in progress.
Blinking Orange The Motion Sensor is not properly connected with your wireless network.
Solid Red The Motion Sensor is powering on, attempting to upgrade firmware, or the device is defective.
Off If the DCH-S150 will not power on, try plugging the device into another outlet.
Motion Sensor PIR (Passive Infrared) sensor for detecting motion.

Tags: , ,

Mar 13

If the LED on the camera remains solid red after powering up, this means the camera cannot connect to the wireless router it was configured to. If you moved the camera, try moving it closer to the router and reboot. If the problem persists, you will need to reset the camera and reconfigure it.

To reset the camera, use a paper clip and press & hold the reset button (on the bottom of the camera) for 10 seconds and then release. Once the camera reboots, follow the Quick Start Guide to set up the camera.

Tags: ,

Sep 12

Select this option to turn off the LED next to the lens.

This will prevent anyone from observing the operation of the D-Link network camera.

Step 1: Log into the web-based configuration of the camera.

Step 2: Click on Setup icon on the top left corner.

Step 3: Go to System -> Device settings and then check the box for “Turn off the LED indicator”.

A10539_image1

Step 4: Click Save button to save the new settings.

Tags: ,

Feb 10

The tollowing chart contiains the different status for the LED indicator on the DCH-S150 Wi-Fi motion sensor:

WPS Blinking Green Press for one second to start the WPS connection process. The Power/Status LED will start to blink green.
Reset Solid Red Press and hold until the Status LED turns red in order to reset the device back to the factory default settings (for about 10 seconds).
Power/Status LED Solid Green The DCH-S150 is successfully connected to your network.
Blinking Green The WPS process is in progress.
Blinking Orange The Motion Sensor is not properly connected with your wireless network.
Solid Red The Motion Sensor is powering on, attempting to upgrade firmware, or the device is defective.
Off If the DCH-S150 will not power on, try plugging the device into another outlet.
Motion Sensor PIR (Passive Infrared) sensor for detecting motion.

Tags: ,

Nov 19

Step 1 Log into the web-based configuration of the camera.

Step 2 Click the Maintenance tab and then click Device Management to the left.

A10431_image1

Step 3 Click Off using the radio buttons next to LED Control.

Step 4 Click Apply to save the settings.

Tags: , ,



 
1 2 Next
css.php