Dec 17

Scenario:

VLAN 1 can communicate with VLAN 2 but VLAN2 cannot access VLAN 1. Both VLANS can access the internet.

DFL-210/800/1600:
Lan Interface: 192.168.1.1
VLAN1: 192.168.2.1
VLAN2: 192.168.3.1

DGS-3024:
Default VLAN— VID-1—Ports 1-8
Vlan1    VLAN— VID 2—Ports 9-24
Port 1 will be tagged and connected to the DFL-210/800/1600.

Setup of D-Link DGS-3024

Step 1:From command line interface of DGS-3024:
DGS-3024# create vlan Vlan1 tag 2
DGS-3024# config vlan default delete 9-24
DGS-3024# config vlan Vlan1 add untagged 9-24
DGS-3024# config vlan default add tagged 1
DGS-3024# config vlan Vlan1 add tagged 1
DGS-3024# save

A10534_image1

A10534_image2

Setup of DFL-210

Step 1: Click on Objects and Interface Address. Add New IP address for the following:

VLAN1: 192.168.2.1
VLAN2: 192.168.3.1
VLAN1_net: 192.168.2.0/24
VLAN2_net: 192.168.3.0/24

Step 2: Click on Interfaces and VLAN. Add New VLAN.
Name: VLAN1
Interface: lan
VLAN ID: 1

IP Address: VLAN1
Network: VLAN1_Net
Default Gateway: None

Click OK.

Step 3: Click on Interfaces and VLAN. Add New VLAN.
Name: VLAN2
Interface: lan
VLAN ID: 2
IP Address: VLAN2
Network: VLAN2_Net
Default Gateway: None

Click OK.

Step 4: Click on Objects and Interface Address. Add New IP4 group.
Name: All_Internal_Nets
Select: lannet, VLAN1_net, VLAN2_net

Click OK.

Step 5: Click on Interfaces and select Interface Groups. Add New Interface Group.
Name: All_Internal_Interfaces
Select: lan, Vlan1, Vlan2

Click OK.

Step 6: Click on Rules, IP Rules, Lan to WAN. Edit The following 4 Rules:
drop_smb-all
Allow_ping-outbound
Allow_ftp-passthrough
Allow_standard

Note: Each of the rules will need to be edited and have the new interface/nets applied.

Step 6: Click on Rules, IP Rules. Add New IP Folder (Optional).
Name: Vlan_Rules

Click OK.

Step 7: Add new IP Rule.
Name: Allow_VLAN1_to_VLAN2
Action: Allow
Service: All Services
Schedule: None
Source Interface: VLAN1
Source Network: VLAN1_Net
Destination Interface: VLAN2
Destination Network: VLAN2_Net

Step 7: Click Configuration Tab and click Save and Activate.

Tags: , ,

css.php