Nov 05

The procedures are in accordance assuming the following device information.

IP Address: 10.90.90.90
Subnet Mask: 255.0.0.0
Default Gateway: 0.0.0.0
All ports are untagged members of the default VLAN.

___________________________________________________________________________________________
A. Login to the Web Management Interface

Step 1: Make sure the device is powered on. Connect your computer to one of the 10/100 Mbps Ethernet ports located on the front panel using an Ethernet cable. Make sure the cable connections are secured.

A10188_image1

Step 2: Statically assign your IP address settings using the following parameters.

IP Address: 10.90.90.10
Subnet Mask: 255.0.0.0

A10188_image2

Step 3: Open a web browser and type in the address bar, type in the URL http://10.90.90.90 and press Enter on the keyboard. Click on Login at the top of the page. By default, there is no user name and password, click OK. You will now be logged into the Web Management Interface.

A10188_image3

____________________________________________________________________________________________
B. Login to the Command Line Interface via Console

Step 1: Make sure the device is powered on. Connect one of the COM ports located on the rear panel of your computer to the RS-232 serial port located on the front panel of the device. Make sure the cable connections are secured.

A10188_image4

Step 2: If you are using the Windows operating system, click on Start and select the Run. Type in the Run field hypertrm and click OK.

Note: For support on running the Terminal Emulation application on another operating system, consult your OS manufacturer.

A10188_image5

Step 3: For the Name, type in DES-3526. Click on OK.

A10188_image6

Step 4: For the Connect To window, select the appropriate COM port used in connecting to the device. Click on OK.

A10188_image7

Step 5: For the Port Setting, use the following paramters:

Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Contol: None

A10188_image8

Click on OK.

Step 6: Make sure the Scroll Lock option is disabled on the keyboard. Press Enter on the keyboard and the Command Line Interface will appear. By default, there is no user name and password. You will now be logged into the command line interface.

A10188_image9

_____________________________________________________________________________________________
C. Login to the Command Line Interface via Telnet

Step 1: Make sure the device is powered on. Connect your computer to one of the 10/100 Mbps Ethernet ports located on the front panel using an Ethernet cable. Make sure the cable connections are secured.

A10188_image10

Step 2: Statically assign your IP address settings using the following parameters.

IP Address: 10.90.90.10
Subnet Mask: 255.0.0.0

A10188_image11

Note: For instructions on statically assigning your IP address, click on the appropriate option.

Windows 2000/XP
Mac OS-X

Step 4: If you are using the Windows operating system, click on Start and select the Run. Type in the Run field telnet 10.90.90.90 and click OK.

A10188_image12

Note: For support on running the Telnet application on another operating system, consult your OS manufacturer.

Step 5: The Telnet screen will appear. By default, there is no user name and password. You will now be logged into the Command Line Interface.

A10188_image13

Tags: , ,

css.php