Oct 23

This video will teach you How to configure shareport mobile such as D-Link DIR-826L

Note: If using a D-Link Mobile router, SharePort Mobile is only compatible in Router and Wifi-Hotspot Mode

Note: In this example we are using the DIR-506L, however, these instructions can be used on any D-Link router that supports SharePort Mobile

Step 1: Insert your USB Flash Drive into your Router

Router Configuration

Step 2: Log into your router:

Open a web browser and enter the IP address of your router or enter http://dlinkrouter. in the address bar. By Default the IP address is 192.168.0.1

The default the username is admin and there is no password

A10074_image1

Step 3: Click on the Setup Tab and Click Storage on the left side

A10074_image2

Step 4: Check Enable SharePort Web Access and ensure Allow Remote Access is checked, Click Save Settings

A10074_image3

Mobile Setup

Step 5: Download the SharePort Mobile App from App Store (Apple/Android)

A10074_image4A10074_image5

A10074_image6

Step 6: Ensure your Mobile device is connected to the wireless signal of your SharePort Mobile supported router.

Step 7: Launch the SharePort Mobile App; The following screen will appear.

A10074_image7

Step 8: Click Settings

A10074_image8

Step 9: Click Edit and enter your username and password

Note: By default the username is set to admin with no password.

Step 10: Change the Port if required (by default it is configured at port 8181 within the router configuration

Note: If accessing content over the internet, enter the IP or Domain address of your router. if access locally, the IP will fill in automatically.

A10074_image9

SharePort Mobile is successfully configured and your USB media should now be accessible.

A10074_image10

Tags: , , ,

css.php