Mar 25

1. If you forgot your password or want to reset the DAP-1520 back to the factory default settings, press and hold the reset button using a paper clip and release after 10 seconds.

A10714_image1

Warning: This process will erase all your settings. 

2. You may repeat the WPS process on the other side of this QIG or log in and run the Setup Wizard. Follow the steps under Configure the DAP-1520.

Tags: ,

Mar 25

Previous Firmware v1.0.xx GUI

Step 1: Open your web browser and in the address bar, type in http://192.168.10.1. The username is ‘admin’ and by default the password is ‘admin’ Click login.

A10587_image1

Step 2: Click on the Advanced tab. On the left side click on the Users button than click on Users

A10587_image2

Step 3: Select admin user and click on Edit button

A10587_image3

Step 4: Select Check to Edit Password. Enter you new password and retype to confirm your new password.

A10587_image4

 

Step 5: Click  [Save Settings]  to complete the process.

 


 

New Firmware Version v2.0.xx GUI

 

Step 1: Open your web browser and in the address bar, type in http://192.168.10.1. The username is ‘admin‘ and by default the password is ‘admin‘ Click login.

 

 

A10587_image5

 

 

Step 2: Click on the Security tab>Authentication > Select Internal User Database.

 

 

A10587_image6

 

 

Step 3: Select Users.

 

 

A10587_image7

 

 

Step 4: Right click on Admin>Select Edit.

 

 

A10587_image8

 

 

Step 5: Enable Edit Password.

 

 

A10587_image9

 

 

Step 6: Enter the Current Logged In Administrator Password. Enter your new password and retype to confirm your new

password (Password is case-sensative). Click on Save.

 

Note: We recommend to write the password and store it in a safe place. In case you forget the password the

unit will need to be factory reset to recover admin access to the unit.

 

 

A10587_image10

 

 

Step 7: After saving the setting you will receive the message below (Password Changed. Please log in), now you are able to log in to the unit with the new password.

 

A10587_image11

Tags: ,

Nov 19

Step 1: Open a browser and log into your D-Link DSN Series SAN (default IP address is http://192.168.1.1).Step 2:- Click on System Administration on the left hand side of the screen.

Step 3:-Click on the User Accounts Tab and enter your new password.

Step 4:-Click the Apply button to save changes.

A10080_image1

Tags: , , ,

Nov 08

Note: mydlink Cloud Service registration requires the camera’s admin password.

Step 1: Launch the D-Link mydlink Baby app.

A10859_image1

Step 2: Tap the camera which you want to change the password for.

A10859_image2

Step 3: Tap the settings icon in the top right-hand corner of the screen.

A10859_image3

Step 4: Tap the arrow to expand the Camera info section

A10859_image4

Step 5: To change the administrator password, enter the existing administrator password in the Current Password field (leave blank if you have not changed it from the default), and enter a new password in the New Password field and again in the Confirm Password field.

A10859_image5

Step 6: Tap Apply to save the configuration.

A10859_image6

Tags: ,

Apr 27

You can change the user name and password within the web-based configuration utility that is built-in to the access point.

Step 1: Open your web browser such as Internet Explorer. Enter the IP address of the D-Link access point (default is 192.168.0.50) and press Enter.

Step 2: Enter your username (admin) and your password (leave blank by default). Click OK.

Step 3: Click on the Tools tab at the top and then click Admin.

Step 4: Enter your new user name and then enter the old password (if any). Enter your new password and click Apply. After the access point restarts, you will be required to enter your new user name and password.

Tags: , , ,



 
1 2 Next
css.php