Apr 22

1.How to open ports on D-Link DGL-4100/DGL-4300?

The Virtual Server feature allows access to services on your LAN from the Internet. This feature is useful for hosting online services such as FTP, web, or game servers.

Step 1: Open a web browser and type the IP address of the DGL-4100/DGL-4300 in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The default password is blank (nothing). Click Log In.

Step 3: Click Advanced at the top and then click Virtual Server on the left side.

DGL-4300c

Step 4: Configure the following:
Enable – Select the checkbox to enable this rule.
Name – Enter a name to identify this rule or select a pre-defined rule using the drop-down list to the right.

DGL-4300d

IP Address – Enter the LAN IP address of the computer that is hosting the service.
Protocol – Select the protocol (TCP or UDP).

DGL-4300e

Private Port – Enter the port on the LAN interface that the service is running on.
Public Port – Enter the public port that will be forwarded to the private port from the WAN interface. The public and private port(s) are usually the same.
Schedule – Select Always.

DGL-4300f

Step 5: Click Save Settings at the top to save this rule.

2.How to configure UPnP™ on D-Link DGL or DIR Gaming router?

This FAQ is for the DGL Gaming router series.

Universal Plug and Play (UPnP) allows discovery of UPnP enabled devices in a network environment. UPnP is only available on Windows Me, XP and Windows Vista. If you are not using either operating system on any of your computers, or do not want to use UPnP, then it is recommended to disable UPnP on the router.

Click here for more info on UPnP.

Step 1: Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The username is admin (all lower case) and, by default, the password is blank (nothing). Click OK.

Step 3: Click on the Advanced tab at the top and then click on Advanced Network on the left-hand side.

Step 4: Under the UPnP Settings section, check-mark the Enabled UPnP buttons to enable UPnP on the wireless router, or uncheck it to Disabled it.

Step 5: Click Save Settings at the top to apply the settings.

Tags: , , ,

Aug 07

You must open ports 6881-6999 (TCP) on your router to allow incoming traffic. If you are using a version of BitTorrent older than 3.2, then you only need to open ports 6881-6889.

1.IF you router is  the D-Link DI-5xx, DI-6xx, DI-704P (revC), DI-704UP, DI-754, DI-764, DI-774, DI-784, DI-804HV, DI-808HV, and DI-824VUP:

The following configuration will allow multiple computers behind the router use BitTorrent.

Step 1: Open your web browser and enter the IP address of your router (192.168.0.1). Enter username (admin) and your password (leave blank).

Step 2: Click on Advanced and then click Applications.

Step 3: Create a new entry:

  • Click Enabled.
  • Enter a name (BitTorrent).
  • Next to Trigger Port, enter 6881 in the first box and 6999 in the second box.
  • Next to Trigger Type, select TCP.
  • Next to Public Port, enter 6881-6999.
  • Next to Public Type, select TCP.

dlink-bittorrent

Step 4 Click Apply and then Continue.

2.For the DI-704P (rev.B) and DI-707P:

Step 1: Open a web browser and enter the IP address of your router (192.168.0.1). Enter admin for your username and then your password (blank by default).

Step 2: Click on the Advanced tab and then Virtual Server on the left side.

Step 3: Enter the following information:

  • Check the box next to Enable.
  • Next to Service Ports, enter 6881-6999.
  • Next to Service IP, enter the IP address of the computer you want to use BitTorrent from.
  • Click Always next to Schedule or enter the time frame that you want.

 dlink-bittorrent2

Step 4: Click Apply and then click Restart to save your changes.

3.For the DI-704P (revA), DI-704, DI-707, DI-711 (revA), DI-713, and DI-713P:

Step 1 Open a web browser and enter the IP address of your router (192.168.0.1). Enter admin for your username and then your password (blank by default). If there is only one box, then enter admin.

Step 2 Click on Advanced at the bottom and then Virtual Server.

Step 3 Enter the following information:

  • Under Service Ports, enter 6881-6999.
  • Under Service IP, enter the IP address of the computer you want to use BitTorrent from.
  • Click the enable box.

Step 4 Click Save and then click Reboot (if prompted).

dlink-bittorrent3

Tags: , , , ,

Feb 10

For the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-704P (revC), DI-704UP, DI-754, DI-764, DI-774, and DI-784:

Step 1: Open your web browser and enter the IP address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default).

Step 2: Click on the Advanced tab at the top and then click Virtual Server on the left side.

Step 3: Check Enabled to activate entry.

Step 4: Enter a name for your virtual server entry.

Step 5: Next to Private IP, enter the IP address of the computer on your local network that you want to allow the incoming service to.

Step 6: Choose Protocol Type – either TCP, UDP, or both. If you are not sure, select both.

Step 7: Enter the port information next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the WAN side, and the private port is the port being used by the application on the computer within your local network.

Step 8: Enter the Schedule information.

Step 9: Click Apply and then click Continue.

For DI-704P (rev.B), DI-707P, DI-714P+, DI-804HV, DI-808HV, and DI-824VUP users:

Step 1: Open a web browser and enter the IP address of your router (192.168.0.1). Enter admin for your username and then your password (blank by default).

Step 2: Click on the Advanced tab and then Virtual Server on the left side.

Step 3: Enter the following information:

* Check the box next to Enable.
* Next to Service Ports, enter the port or range of ports you want to open.
* Next to Service IP, enter the IP address of the computer you want to open the port to.
* Click Always next to Schedule or enter the time frame that you want.

Step 4: Click Apply and then click Restart to save your changes.

D-Link-ports-1

For DI-704, DI-704P (rev. A), DI-707, DI-711, DI-713, and DI-713P users:

Step 1: Open your web browser and enter the IP address of the router (192.168.0.1). Enter user name (admin) and your password (blank by default). If there is only 1 box, enter admin.

Step 2: Click on Advanced at the bottom and then click Virtual Server.

Step 3: Create a new entry:

* Enter the port or range of ports you want to open in the box under Service Ports.
* Enter the IP address of the computer you want to open the ports to.
* Check the box under Enable.

D-Link-ports

Step 4: Click Save and then click Reboot.

Tags: ,

css.php