Sep 14

The D-Link DIR-506L connects to your cable modem, DSL modem, or other Internet source and shares your Internet connection with your devices wirelessly, providing Internet access for an entire home or office. You can also share files with other computers or devices on your wireless network by using the SharePort Mobile feature.

D-Link DIR-506L Features and Hardware Overview

• Faster Wireless Networking

– The provides an up to 150 Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.

• Compatible with 802.11g Devices

– The is still fully compatible with the IEEE 802.11g standards, so it can connect with existing 802.11g devices.

• Advanced Firewall Features

– The Web-based user interface displays a number of advanced network management features including:

• Content Filtering

– Easily applied content filtering based on MAC address and website address.

• Filter Scheduling

– These filters can be scheduled to be active on certain days or for a duration of hours or minutes.

• Secure Multiple/Concurrent Sessions

– The can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the can securely access corporate networks.

• User-friendly Setup Wizard

– Through its easy-to-use Web-based user interface, the lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Configure your router to your specific settings within minutes.

Hardware Overview

D-Link DIR-506L Features and Hardware Overview

1.Device Status LED Indicator

If Device Status LED is flashing green when the device is on, power is being provided by the battery.
If Device Status LED is solid green when the device is on, battery is fully charged and power adapter attached.
If Device Status LED is solid amber when the device is on, the device is charging the battery.
If Device Status LED is solid amber when the device is off with the battery inside, the battery is charging.
If Device Status LED is solid red when the device is on, the battery is low.
If Device Status LED is flashing red when the device is on, the battery temperature is high.
If Device Status LED is off and the power adapter is plugged in, and battery has finished charging.
If Device Status LED is off, no power adapter is plugged in and no battery is inside.

2.WPS Button

Pressing the WPS button allows additional devices to connect securely and automatically.

3.Reset Button

Pressing the Reset button restores the DIR-506L to its original factory default settings.

4.USB Port

Connect a USB flash drive to configure the wireless settings using SharePort™ Mobile and SharePort™ Web File Access.
Both allow you to share a USB or a storage device with your local network.

5.USB LED Indicator

If the USB LED is solid green, a USB storage device is attached.
If the USB LED is flashing green, the DIR-506L is accessing files in the USB storage device.

6.Ethernet LED Indicator

If the Ethernet LED is solid green, an Ethernet connection is established
If the Ethernet LED is flashing green, data packets are being transferred via Ethernet

7.Wi-Fi LED Indicator

If the Wi-Fi LED is flashing green, a data packet transferred.
If the Wi-Fi LED is flashing green every second for two minutes, it is showing the WPS status.

D-Link DIR-506L Router Setup Diagram

D-Link DIR-506L Router Setup Diagram

D-Link DIR-506L Router Setup Diagram

Tags: , , , , ,

May 25

1.DIR-855 Media Router PPTP Setup

dir-855-pptp

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.

Address Mode:Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.

PPTP IP Address:Enter the IP address (Static PPTP only).

PPTP Subnet Mask:Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).

PPTP Gateway:Enter the Gateway IP Address provided by your ISP.

PPTP Server IP:Enter the Server IP provided by your ISP (optional).

Username:Enter your PPTP username.

Password:Enter your PPTP password and then retype the password in the next box.

Reconnect Mode:Select either Always-on, On-Demand, or Manual.

Maximum Idle Time:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.

DNS Servers:The DNS server information will be supplied by your ISP (Internet Service Provider.)

MTU:Maximum Transmission Unit – you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU.

MAC Address:The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.

2.DIR-855 Media Router L2TP Setup

dir-855-l2tp

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.

Address Mode:Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.

L2TP IP Address:Enter the L2TP IP address supplied by your ISP (Static only).

L2TP Subnet Mask:Enter the Subnet Mask supplied by your ISP (Static only).

L2TP Gateway:Enter the Gateway IP Address provided by your ISP.

L2TP Server IP:Enter the Server IP provided by your ISP (optional).

Username:Enter your L2TP username.

Password:Enter your L2TP password and then retype the password in the next box.

Reconnect Mode:Select either Always-on, On-Demand, or Manual.

Maximum Idle Time:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.

DNS Servers:Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).

MTU:Maximum Transmission Unit – you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU.

Clone MAC Address:The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.

Tags: , , ,

css.php