1.Configuration of D-Link DFL-200/700/1100
Step 1: Make sure the firewall is using at least firmware 1.30 If the firmware is lower than 1.30 download and install the firmware from the support site.
Step 2: Click onat the top then on the left hand side.
Step 3: Click on Add new PPTP Server. Give the server a friendly name, set the client IP pool outside of the DHCP scope, and enable proxy arp. Hit the apply button.
Step 4: Click on Users on the left hand side.
Step 5: Click on Add new in the Local User Database.
Step 6: Create a username(Dlink) and password, then hit apply.
Step 7: Click on the Activate Changes button in the lower left corner.
Step 8: Click on the Activate Changes button in the middle of the screen.
2.Configuration of Win2k/WinXP
Step 1: Right-click My Network Places and select Properties.
Step 2: Create a New Connection.
Step 3: The Network Wizard will appear. Click on Next to continue.
Step 4: Choose your Network Connection Type (You will be connecting to a private network). Click Next.
Step 5: Enter the Destination Address. This will be your public IP address found on the Status tab of the DFL.
Step 6: Select All Users for the Connection Availability and click Next.
Step 7: Add a shortcut to your desktop and click on Finish.
Step 8: Enter your Username and Password to connect to the virtual private connection. Click the Connect button to authenticate to the DFL. You will see a balloon pop-up indicating that you have connection.