Printers connected to the D-link DI-824VUP cannot be configured using the standard Windows TCP/IP port configuration wizard. You must install the PRTmate software that ships with the unit.
Step 1: Insert the installation CD into your CD-ROM drive.
If you have lost your installation CD, click here.
Step 2: Click Install D-Link Print Server Software.
Step 3: Select your operating system.
Step 4: Please wait while the InstallWizard® Wizard prepares the setup.
Step 5: Click Next.
Step 6: Click Browse if you wish to specify the folder to install the program. Click Next.
Step 7: Please wait while the print server software is installed.
Step 8: When setup is complete click Finish.
Step 9: Click OK and restart your computer.
Step 1: In Windows 2000 go to My Computer > Control Panel > Printers.
In Windows XP click Start > Control Panel > Printers and Faxes.
Step 2: Right-click the printer you want to configure and select Properties.
Step 3: Click the Port tab, select PRT (Print Server), and then click Configure Port.
Step 4: Select the interface (Parallel or USB) and then enter the IP address of the D-Link DI-824 below All-in-1 IP Sharer´s IP. Click OK.
Step 5: Click OK.
Tags: DI-824VUP, print server, printer