Aug 02

The PSP (PlayStation® Portable) only supports WPA, not WPA2. If you are using WPA/Auto, you may need to lock the router to WPA only (firmware 1.07 or higher). This will allow you to connect to your PSP. To switch to WPA only, follow these steps:

Step 1: Open a web browser and type the IP address of the DIR series(D-Link DIR-655) router into the address bar (default is

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Setup tab at the top and then click on Wireless Settings on the lefthand side.

Step 4: From the Wireless Security Mode dropdown menu, select WPA-Personal.

Step 5: From the WPA dropdown menu, select WPA Only.


Step 6: Under Pre-shared Key, enter the desired Pre-Shared Key.

Step 7: Click on Save Settings to save your settings.

Tags: , ,