Jan 29

Note: SMTP uses a standard port which is port 25. There isn´t an option to add or change the port. If your SMTP server uses a port other than port 25 then it will not be compatible.

The following instructions provide an example of how Email Settings on D-Link DIR-660 should be setup, the default port used is 25.

Step 1: Log into the router.

Note: For the DIR model routers, the Email Settings can be found under the TOOLS tab.


Step 2: Click the checkbox next to Enable Email Notification.

Step 3: Configure the following under the EMAIL SETTINGS section:


•From Email Address: Enter in an address where you would like the email to show from.
•To Email Address: Enter where you would like the email to be sent.
•SMTP Server Address: Enter the SMTP server address.
•Enable Authentication: If your server requires authentication, click the checkbox.
•Account Name: Enter the required information.
•Password: Enter the required information.

Step 4: Finally, you can have the log emailed to you when it is full by checking the On Log Full: option and/or use a schedule that was previously created to email the log to the email address that was provided.


Tags: , , ,

Aug 03

DHCP Reservation is used to assign a specific IP address to a specific MAC address on the LAN.

Use the following steps:

Step 1: Open a web browser and type the IP address of the DIR series router into the address bar (default is

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Setup tab at the top and then click on Network Settings on the lefthand side.

Step 4: Scroll down to Add DHCP Reservation.


Step 5: Input a desired name and address. Click the Copy Your PC’s MAC ADDRESS button.

If the Reservation address you’re creating is not for the machine that you are working from you’ll need to obtain the MAC address of that machine.

Step 6: Click on Save Settings to save your settings.

Tags: , , ,