Sep 06

• Ensure you are using the latest version of the wizard, check the version num-ber available on against the version you are attempt-ing to use.

Why does the setup wizard for my D-Link DCS camera not work?

• It is possible that you have downloaded the wrong wizard. Please ensure you have downloaded the wizard for the correct model camera.

• It is possible that you have downloaded the wrong wizard. Please ensure you download the setup wizard for the correct hardware version of your camera. (For more information, please refer to the Q&A document “How do I check the hardware version of my DCS Camera?”)

• Ensure that your router allows UPnP.

• Ensure that if you are using a computer with Microsoft Windows Vista or above, that your network type is set to “Home Network” or “Work Network”. Setting to “Public Network” will stop the wizard from being able to detect the camera.

Tags: ,

Jun 16

If the setup wizard is unable to locate the D-Link DNR-322L try the following:

  • Download the latest version of the setup wizard at
  • Make sure the PC being used is on the same network as the DNR-322L
  • Temporarily disable any Anti-Virus software
  • Temporarily disable Windows firewall

* Note: Please re-enable any Anti-Virus software and Windows firewall *

Tags: , ,

Jan 27

On this page, the user can configure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard on D-Link Wireless N 600 Dual Band Gigabit Cloud Router DIR-826L

Click the IPv6 Internet Connection Setup Wizard button and the router will guide you through a few simple steps to get your network up and running.


Click Next to continue to the next page. Click Cancel to discard the changes made and return to the main page.


The D-Link DIR-826L router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found.


However, if the automatic detection fails, the user will be prompt to either Try again or to click on the Guide me through the IPv6 settings button to initiate the manual continual of the wizard.


There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider.

Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. The 3 options available on this page are IPv6 over PPPoE, Static IPv6 address and Route, and Tunneling Connection.

Choose the required IPv6 Internet Connection type and click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page.


IPv6 over PPPoE

After selecting the IPv6 over PPPoE option, the user will be able to configure the IPv6 Internet connection that requires a username and password to get online.Most DSL modems use this type of connection.

The following parameters will be available for configuration:


PPPoE Session: Select the PPPoE Session value used here. This option will state that this connection shares it’s
information with the already configured IPv6 PPPoE connection, or the user can create a new PPPoE connection here.

User Name: Enter the PPPoE username used here. If you do not know your user name, please contact your ISP.

Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP.

Verify Password: Re-enter the PPPoE password used here.

Service Name: Enter the service name for this connection here. This option is optional.

Static IPv6 Address Connection

This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all this information.


Use Link-Local Address:

The Link-local address is used by nodes and routers when communicating with neighboring nodes on the same link.
This mode enables IPv6-capable devices to communicate with each other on the LAN side.

IPv6 Address:

Enter the WAN IPv6 address for the router here.

Subnet Prefix Length:

Enter the WAN subnet prefix length value used here.

Default Gateway:

Enter the WAN default gateway IPv6 address used here.

Primary IPv6 DNS Address:

Enter the WAN primary DNS Server address used here.

Secondary IPv6 DNS Address:

Enter the WAN secondary DNS Server address used here.

LAN IPv6 Address:

These are the settings of the LAN (Local Area Network)IPv6 interface for the router. The router’s LAN IPv6 Address
configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.)

Tags: , , , , ,

Nov 29

To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (

You may also connect using the NetBIOS name in the address bar (http://dlinkrouter).

This wizard is designed to guide you through a step-by step process to configure your new D-Link router and connect to the Internet.Click Next to continue.

Please wait while your router detects your internet connection type.

Please give your network a name using up to 32 characters. Click Next to continue.

In order to secure your new networking device, please enter a password and click Next.

Select your time zone from the drop-down menu and click Next to continue.

Once this screen appears, your setup is complete. Click Save & Connect to reboot the router.

Before your router reboots, you will be asked if you want to bookmark ‘D-Link Router Web Management,” click Ok to finish.

Tags: , ,