Jun 29

I was replaced with a new router and this was unable to send signals more than 10 meters. Signal range was dropped and unable to get in side room.


We are sorry to hear that you are having connectivity issues with the DIR-600L. Based on the information you described in your review, D-Link suggests the following: If your router is not performing properly (freezing, automatically rebooting, disconnecting, etc), this could be happening for a number of reasons.

Please check the following:

1. Ensure the router is in a well ventilated area. If the router does not get adequate airflow, it could overheat.


Wireless Client Mode D-Link


2.Ensure the firmware is up to date. Firmware is the “Brains” of the router, it is the programming that tells it how to work. D-Link will release new firmware versions when bugs are reported and fixed. Upgrading the firmware may correct issues you are experiencing.

3. Perform a factory reset on the router. On the back of the router locate a pinhole marked “RESET”. Press this button with the end of a paperclip for about 8-10 seconds and release it – The light should go off and then come back on. After the router finishes rebooting, you will need to re-configure your settings (for both the Wireless and Internet).

If the issue still persists, please contact our technical support team at: www.dlink.com/support. Thank you for being a D-Link customer.

Tags: , , ,