Apr 23

1.Unplug the power from your broadband modem and shut down your computer.

2.Disconnect the Ethernet cable connected from your computer to your broadband modem. Leave the end connected to your broadband modem attached.

3.Connect the end of the Ethernet cable removed from your computer to the WAN port on the router.

4.Connect the provided Ethernet cable from a numbered port on the router to your computer.

5.Plug the power back into your broadband modem and wait for the broadband modem to sychronize to the network (refer to your modem manual for information on this).

6.Plug the power adapter (provided with the router) into the router, then connect the other end to a power outlet and verify that the power LED on the router is on.

Note: If the Power LED is not lit, verify that the power adapter is properly connected to the D-Link® Storage Router and to a working power outlet.

7.Power on your computer. Once booted launch your web browser and type in a web address such as http://www.dlink.cc to verify that you have an Internet connection.

8.If a web address is not accessible, enter in your web browser address bar. Once the main screen
appears, press the button labeled Internet Connection Setup Wizard and proceed through the wizard.

Tags: , ,