Feb 26

Some people asked the D-Link DI-524 often disconnected,How to solve it?Upgrade the hardware version is the best choice.

WARNING: DO NOT upgrade the firmware with a wireless connection. You will damage the router. Also, your current settings may be lost after upgrading.

Step 1: Download the firmware at http://dlink.com/support and save the file to your computer.Now the D-Link DI-524 hardware version is E(5.10).

Step 2: Open your browser, enter the IP address of your router (192.168.0.1) and click OK.

Step 3: Enter your username (admin) and leave the password field blank, which is the default password. Click OK to enter the web configuration for the device.If you forget password check here to reset DI-524

Step 4: Click on the Tools tab and then the Firmware button on the left side. Click on the Browse button and browse to the .bin file you downloaded in Step 1. Highlight the file by clicking on it once and click Open. Click Apply. It will take a few seconds for the upgrade to complete. Click on the Continue button.

Step 5: After the router reboots, close your web browser and reopen it. Enter 192.168.0.1 to reconnect with the web configuration. Enter username admin and again leave the password blank. Click OK. The firmware upgrade is now complete.

Tags: , ,

Aug 17

Step 1: Install and open the PS Admin utility, available from http://support.dlink.com/. Click on Download Firmware.

download_firmware

Step 2: The Download Firmware dialog box will appear. Click Browse.

upload

Step 3: Browse to the location where the firmware was saved and click OK.

browse

Note: Do not interrupt the firmware upgrade process.

Step 4: Click OK once you recieve the confirmation prompt.

do_not_interrurrpt

Step 5: The firmware file will start transfering to the print server.

transfering

Step 6: After the file has been uploaded, the Status page in the print server will reflect the version of the file that was just uploaded (in this example a DP-311U is used).

success

Tags: , , ,

Aug 11

The D-Link 4-Port Broadband Router been discontinued as of May 01, 2007 in the US.Many people are looking for DI-604 Firmware Download.

DI-604 Firmware Download:

site: ftp://ftp.dlink.com/Gateway/di604_revE1/Firmware/di604_revE_firmware_353.bin

Version:3.53

Date:4/24/2007

Revision Info:

¤ Updated DDNS screen and request.
¤ Updated PPPoE WAN settings.
¤ Applied minor Grammar corrections

1.How to upgrade the firmware on DI-604?

Step 1: Download the latest firmware.

Step 2: Once you´ve downloaded the firmware, open a web browser such as Internet Explorer or Netscape and enter the IP address of your router (192.168.0.1).

Step 3: Enter your username (admin) and your password (leave the field blank). Click OK to enter the web configuration for the device.

Step 4: Click on the Tools tab and then the Firmware button on the left side. Click on the Browse button and browse to the .bin (or .dlf) file you downloaded in Step 1. Highlight the file by clicking on it once and click Open.

Step 5: Click Apply. It may take a up to 30 seconds for the upgrade to complete. Click on the Continue button. The firmware is now upgraded.

Step 6: If you get a Page cannot be displayed or similar error after clicking Continue, close your browser and re-open it. Enter 192.168.0.1 and press Enter. You should now be prompted for your username (admin) and your password (leave blank).

2.How to upgrade the firmware on the D-Link DI-604 and the DI-614+ using a Macintosh computer?

Step 1. Create a Folder on the Desktop Screen:
From a blank spot the Desktop Screen, press and hold the Control key on the keyboard and click the mouse button. Release the Control key, click New Folder, and name it firmware.

Step 2. Retrieve Firmware from Website:
Click link below and download file to the folder created in step 1.

Step 3. Upgrade the Firmware:
A. From the Main Desktop Screen, launch Internet Explorer or Netscape.

B. Type 192.168.0.1 in the Address bar and click Go.

C. For the User ID, type admin and click OK.

D. Click Tools on the top and then click Firmware on the left side.

E. Click Browse>Desktop>firmware, double click di6xx_firmware_203.bin and click Apply. Wait for approx. 15 seconds or until the M2 light stops flashing on the DI-6xx unit then click Continue.

F. This takes you back to the Tools page. Check the Current Firmware Version on the Tools page to confirm that the firmware loaded successfully.

Tags: , ,

css.php