D-Link Blog Home

The most important step is creation of a reasonable networking scheme, our FAQs will use the below scheme.

Step 1: Choose Setup->VPN and then Add->IPsec VPN. Fill in the following values.

Name: Whatever you like.
Local Net/Mask: Enter the LAN Net of the DIR.
Remote IP: Enter the WAN_IP of the Hub
Remote Local LAN Newt /Mask: Enter the Concentrated Network from the Hub.
Authentication->Pre-shared Key: Whatever you like
NAT-T Enable: Checked
Keep Alive: Keep Alive
PSF: Perfect Forward Security is on.

Step 2: Choose Save Settings.

Tags: DIR-130, VPN

This article teaches you VPN config about D-Link Firewall and DI-804HV,With the DFL-800 as an example.

1. Go to “System” → “DNS” and enter a working DNS server IP, here we use our ISP’s DNS server.

2. Go to “System” → “Misc. Clients” → “Add” to add a DDNS client, here we choose dyndns.org DDNS client.

3. Then enter the full domain name and your account info.

4. Go to “Objects” → “Address book”, previously, we use an IP on the remote gateway, here, just change the IP to the domain name, here we assume the other side (DI-804HV also uses DDNS and has the domain test1.dyndns.org setup). Click on the “remote-gw” object, and modify the IP to “dns:test1.dyndns.org”. Make sure “dns:” is entered before the domain name.

5. In DI-804HV, just replace the remote gateway IP to the DDNS domain name we set up in D-Link DFL-800 (test.dyndns.org)

Tags: DI-804HV, Firewall, VPN