Aug 12

Tell you how to setup D-Link DFL-210/800/1600 Firewall PPPoE Wan Connection.

Step 1: Open a web browser and type the IP address of the firewall into the address bar (default is 192.168.1.1). Press Enter.

Step 2: Click on the plus sign (+) next to Interfaces and select PPPoE

Step 3: Click the Add button and Select PPPoE Tunnel.

dlink-dfl210a

Step 4: Create the PPPoE Tunnel as Followed:

  • Name: Connection Name
  • Physical Interface: Wan
  • Remote Network: all-nets
  • Schedule: None
  • Username: PPPoE Username
  • Password: PPPoE Password
  • Confirm Password: PPPoE Password
  • Step 5: Click OK.

    dlink-dfl210b

    Step 6: Click on the plus sign next to Rules select IP Rules and Select lan_to_wan

    dlink-dfl210c

    Step 7: Right click the drop_smb-all and select Edit.

    Step 8: Change the Destination Interface to your Created PPPoE Interface and Click OK.

    dlink-dfl210d

  • Step 9: Perform the same steps for the following rules:
  • Allow_ping-Outbound
  • Allow_ftp-passthrough
  • Allow_standardStep 10: Click on the Configuration tab and select Save and Activate from the dropdown menu. Click on OK to save and activate your changes.dlink-dfl210e
  • Tags: , , ,

    css.php