Feb 24

Follow the steps below to set up the COVR-3902 system using the D-Link Wi-Fi app.

 

Step 1: Download the D-Link Wi-Fi app from the App Store or Google Play. Download and install (do not launch app yet).

 

 

Step 2: Plug in only the COVR router and allow about one minute to bootup. Once the power LED is green, it is ready. Do not plug the extender in yet.

 

Step 3: Connect your device using Wi-Fi to the router. The router”s Wi-Fi network (SSID) and password are located on the bottom of the router or on the Wi-Fi Configuration card included. Once connected to the router, launch the Wi-Fi app.

 

Step 4: The first time you launch the app, the Device Connection screen will appear. Tap Next to continue.

 

 

Step 5: The Select Device screen will display the COVR-2600R (router) MAC address information. Tap Next to continue. If you do not see this, make sure your device is connected to the router via Wi-Fi. If you are connected to another Wi-Fi network or using 3g/4g, it will not work.

 

 

Step 6: Plug in the extender near the router and power on. Tap Next to continue. The router will now search for the extender and connect. This process can take up to two minutes.

 

 

If you cannot connect to the extender, make sure the extender is powered on and in the same room as the router. If the power LED and the two LEDs on the right are green (the other two are off), you will need to reset the extender by pressing the reset button located on the back of the extender for 10 seconds with a paperclip.

 

You can also tap Next and connect the extender to the router by pressing the WPS button on the extender, or tap Skip and connect later.

 

 

If you tapped Next, within two minutes press the WPS button on the side of the extender. Allow 2-3 minutes to connect.

 

 

Step 7: When the extender is finished installing, tap Next to continue.

 

 

Step 8: Enter a Wi-Fi network name (SSID) and a Wi-Fi password. Tap Next to continue. Note this Wi-Fi name and password will be assigned to both the 2.4GHz and 5GHz bands on both the router and extender.

 

 

Step 9: Enter a password for the COVR system. This password is used to configure the router and the extender via Wi-Fi app and the web UI. If you want the app to remember this password, tap Remember Password to enable. Tap Next to continue.

 

 

Step 10: Tap Save to finish setting up the COVR-3029 system.

 

 

Step 11: Tap Next to continue.

 

 

Step 12: If you want to share your device settings (Wi-Fi network name and password), tap Share, or tap No to continue. If you tapped Share, you will can select who and how you want to send this information to (e.g. Twitter, text message, etc).

 

Step 13: Congratulations your router and extender are configured. Tap Finish. Once the router boots back up, you will need to connect your device to the new Wi-Fi network you just created. Also, you can unplug the extender and place in a location between your router and any dead zones. When you plug the extender in, allow up to two minutes to boot. The LEDs will indicate your connection quality to the router. Green means it is a good connection, orange means a fair connection, and red means a poor connection. If orange or red, move the extender closer to the router.

 

Tags: ,

Feb 13

Note: After you have changed the camera’s Wi-Fi network, you will need to connect your smart phone/tablet to same Wi-Fi network in order to access the camera’s live feed.

Step 1: Launch the mydlink Baby app.

18

Step 2: Tap the camera which you want to change the Wi-Fi network for.

15

Step 3: Tap the settings icon in the top right-hand corner of the screen.

wifi1

Step 4: Tap the arrow to expand the Wireless settings section

wifi2

Step 5: Select the Wi-Fi network which you want to change to.

wifi3

wifi4

Step 6: Enter the password for the new Wi-Fi network. Click Connect.

dlink5

Tags: , ,

Nov 14

Step 1: Open a web browser and enter http://dlinkap.local in the address bar.

A10764_image1

Step 2: Enter your Admin Password in the field provided. If you have not changed the password from the default setting, the password field is to be left blank. Click Log In.

A10764_image2

Step 3: Move the cursor to Management at the top right-hand corner of the screen, then click System from the drop-down menu.

A10764_image3

Step 4: To save the current configuration settings of your wireless router to a file, click the Save Configuration to File button. Depending on your browser, the file may be automatically saved to your ‘Downloads’ folder, or a ‘Save File’ or similar dialog box will appear, asking your where you wish to save the file.

A10764_image4

To load a previously saved configuration file, click Select File. Once you have located the configuration file (config_rpt.bin) on your hard drive, click OK. The name of the file will be displayed next to the Select File button. Click Restore Configuration from File. A confirmation dialogue will appear, click OK to commence the loading of the configuration.

Note: If you have upgraded or downgraded the firmware on your Wi-Fi Extender, do not load configuration files that were saved using a previous firmware version. The load will not be successful, and can damage the unit.

Tags: , ,

Nov 03

Note: The following instructions and screenshots are for Windows® 7. Other versions of Windows may have slightly different appearances.

Step 1: Click on the network icon in the bottom right corner (next to the clock)

A10738_image1

Step 2: Select the wireless network you want to connect to and click Connect

A10738_image2

Step 3: If you have a WIFI password configured on your router, enter the password and click OK.

A10738_image3

Step 4: Select the Network Type.

A10738_image4

Step 5: Your computer is now connected. The computer should now automatically connect to this network when it is within range.

A10738_image5

Disclaimer: mydlink and the mydlink logo are trademarks of D-Link Corporation. iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Internet Explorer, Windows, and Vista are registered trademarks of Microsoft Corporation in the United States and other countries.

Tags: , ,

Sep 16

FOUNTAIN VALLEY, Calif., Sept. 16, 2014 /PRNewswire/ — D-Link today announced that the Wi-Fi Smart Plug (DSP-W110), the company’s newest and most affordable Smart Plug, is now shipping. Providing a simple way to turn devices on and off from anywhere using the free mydlink™ Home app for iOS® and Android™ smartphones or tablets, the newest Wi-Fi Smart Plug brings the convenience and flexibility of mydlink to everyday household electronic devices.

14630

In addition to turning devices on and off with the tap of a smartphone screen, the Wi-Fi Smart Plug also enables users to create power on/off schedules to truly automate a range of devices in the home. Particularly useful for travelers, this feature can be used to create a lighting schedule to make an empty home look occupied while the family is out of town.

“The Wi-Fi Smart Plug is an incredible way to introduce yourself to the benefits of an automated home,” said Daniel Kelley, vice president of marketing, D-Link Systems, Inc. “Whether it’s brightening up the house before you get home, creating a lighting schedule for while you’re away, or remotely powering off a device you accidentally left on, the Wi-Fi Smart Plug makes your home brighter, smarter and more in tune with you.”

The new D-Link Wi-Fi Smart Plug features a simple one-button installation – users press the WPS button on their existing router and on the Smart Plug, and then download the mydlink Home mobile app to start setup.

More about the Wi-Fi Smart Plug (DSP-W110):The mydlink Wi-Fi Smart Plug delivers a range of easy-to-use features, including:

Power Scheduling – easily create on/off schedules for home appliances, lights and other electronic devices powered through the Wi-Fi Smart Plug.

Local and Remote control – use the free and intuitive mydlink Home mobile app to instantly turn devices on or off from an iOS or Android smartphone or tablet.

Wi-Fi Connectivity – requires no additional hub or device, works with any Wi-Fi network.

Simple Setup – Wi-Fi Protected Setup (WPS) button offers quick and easy setup to connect to any router supporting the WPS standard.

Availability and Pricing  The D-Link Wi-Fi Smart Plug (DSP-W110) is now available in the United States for $39.99 on Amazon.com anddlinkshop.com. More information is available online atwww.dlink.com/dsp-w110.

About D-Link  D-Link is the global leader in connectivity for home, small business, mid- to large-sized enterprise environments, and service providers. An award-winning designer, developer, and manufacturer, D-Link implements and supports unified network solutions that integrate capabilities in switching, wireless, broadband, storage, IP Surveillance, and cloud-based network management. For more information visit www.dlink.com, or connect with D-Link on Facebook (www.facebook.com/dlink) and Twitter (www.twitter.com/dlink) or D-Link’s blog (http://blog.dlink.com/).

mydlink, D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries. All other third-party marks mentioned herein may be trademarks of their respective owners. Copyright © 2014 D-Link. All Rights Reserved.

Tags: , , ,



 
1 2 3 Next
css.php