Jan 13

How to set up VLAN network for BRT series on ASUS BRT-AC828 VPN Wi-Fi Router?

Introduction

Virtual LAN(VLAN) is a logical LAN segment that is used to segregate a physical network into multiple virtual LAN network. This allows business enviroments to easily manage multiple networks without sacrificing security and restrict the broadcast domain size while reducing the chance of packet collision, and the VLAN network is required in business environment.

The following setting steps explain how to set up VLAN for dividing multiple networks within a company.

 

Contents

Network Topology

Divide network into different departments with VLAN.

Setting Procedure

1. Type router.asus.com or 192.168.1.1 on the address bar and login to the management web console.

2. Click VLAN from the Advanced Settings on the left column.

* If you’ve already changed default IP address , type the new IP address to login .

* Please use network tool “Device Discovery” if you forgot a new IP address.

3.  Enable VLAN

4.  Click Edit (Pen) icon to edit VLAN settings

*All ports and wireless SSIDs belonging to VLAN1 show as factory default. That’s a broadcast domain so it’s the same group of devices to be assigned to all the same VLAN ID.

*For subnet on default, it’s set to IP address and subnet by the part of LAN settings.

5. Create VLAN for administrator team. Delete all except for LAN1 to LAN4, and click OK.

6. Next, create a VLAN for sales division. Click “+” to add.

7.  Input VLAN information

VLAN ID: VLAN number

Priority:This setting is used for setting priority on network traffic. You can set it from 0 (Best effort) to 7(the highest)

Subnet:It shows IP address segment and default gateway IP address. If you have to set up detailed IP address, please click Edict (Pen) icon.

 

8. Click OK once the you complete setting.

※PVID(Port VLAN ID) assigns VLAN when it gets untagged frame to the port.  If it gets tagged frame, the system refers VLAN ID and decide VLAN destination. 

 

Tagged VLAN

Tagged VLAN means frames which belong to the same VLAN can be tagged with a VLAN ID , therefore, the virtual network can be built among multiple network switches via connecting trunk port of switch. To cascade multiple switch with the same VLAN network, you have to enable tagging on specified LAN interface.

On the following network topology, Port5 belongs to VLAN1 and VLAN2, transfer frame with tagged VLAN to another network appliance (ex. switch).

 

Tags: , , ,

Jan 10

IMPORTANT: D-Link does not guarantee the compatibility of all USB storage devices.

 

Step 1: Open your web browser and type in http://dlinkrouter.local. or type in the IP address of the router (default – http://192.168.0.1).

Step 2: Enter or select the username (admin) and enter your password (blank by default), and then click OK or Log In. The password is case-sensitive.

If you forgot your password, you will need to reset the router back to the factory default settings. Unfortunately this will remove any settings you have and you will need to reconfigure your router.

To reset your router, use a paper clip and press & hold the reset button (usually located on the back of the router) for 10 seconds and release. Allow 1 minute to reboot. The default IP address of the router will be 192.168.0.1and the password is blank.

If you are connecting wirelessly, you will need to reconnect your device to the default wireless network after the router reboots. The default Wi-Fi network/password may be printed on the label on the bottom of the router or on the included Wi-Fi Configuration Card (newer models).

To reconfigure, refer to the Quick Install Guide included with your router or download the PDF (click Close and then click Downloads).

 

Step 3: Click on Settings and then USB Sharing.

 

 

Step 4: Enable Windows File Sharing (SAMBA), then click Save.

 

Tags: , , ,

Dec 08

After setting up my Facebook Wi-Fi router and verifying my local network internet connection is OK, my customers are not able to access the internet using the Facebook Wi-Fi connection, an error message that reads: “We do not get a valid answer from the Central Server” displays after attempting to login.

 

If you are seeing this error, please do the following:

 

Step 1. Ensure you are online or that your internet connection is working properly

Step 2. Login to your Facebook account and go to your business page settings

 

A10927_image1

 

Step 3. Look for the “country restriction” settings. If  you have any filters, please remove them, save the settings and try again.

 

A10927_image2

You and your customers should be able to access the Internet using the Facebook Wi-Fi connection.

Tags: ,

css.php