1.Change the wireless mode of D-Link DWL-2210AP
Step 1: Open a web browser and type the IP address of the DWL-2210AP in the address bar (default is 192.168.0.50). Press Enter.
Step 2: The default username is admin (all lower case) and the default password is admin (all lower case). Click OK.
Step 3: On the left side, click Advanced and then click Wireless.
Step 4: Next to Mode select either IEEE 802.11b or IEEE 802.11g from the drop-down list.
- IEEE 802.11b supports data rates ranging from 1 to 11 Mbps.
- IEEE 802.11g supports data rates ranging from 1 to 54 Mbps.
Step 5: Click Update to save the new setting.
2.Change the wireless channel of D-Link DWL-2210AP
Step 1: On the left side, click Advanced and then click Wireless.
Step 2: Next to Channel select a channel from the drop-down list. It is recommended to use a non-overlapping channel of 1, 6, or 11. If you have 2.4GHz phones or experience interference, simply changing the channel may fix the issue.
Step 3: Click Update to save the new setting.
Tags: channel, DWL-2210AP, wireless mode
