Mar 23

It is recommended to enable WPA-PSK on your D-Link wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA-PSK passphrase being used.

1. Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop.

2. Highlight the wireless network (SSID) you would like to connect to and click Connect. If the network is using WPA-PSK, the screen (as shown to the bottom-right) will appear.

D-Link-DWA-125-WPA-1

3. Enter the WPA-PSK passphrase exactly as it is on your wireless router or access point. Click the Show text in the password field box to see the passphrase. Unchecking it will hide it.

4. Click OK to connect to the network. Allow up to 30 seconds to connect.

If you would like to create a new network and enter the WPA-PSK settings, refer to the next page.

D-Link-DWA-125-WPA-2

It is recommended to enable WPA-PSK on your wireless router or access point before configuring your wireless adapter. Make sure you enter the passphrase exactly the same on all wireless devices.

1. Open the D-Link Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. Click on New to create a new profile or highlight an existing profile and click Modify.

2. Select WPA/WPA2-Personal under Set Security Option.

3. Select TKIP or AES.

4. Enter the passphrase exactly as it is on your wireless router or access point.

5. Click OK to connect to the network. Allow up to 30 seconds to connect.

D-Link-DWA-125-WPA-3

To buy D-Link DWA-125 Wireless on Amazon:

Tags: , ,

css.php