Sep 10

To run the security wizard, click on Setup at the top and then click Launch Wireless Security Setup Wizard.This article in D-Link DIR-825 as an example.

dlink-router-Wireless-Security

Check the Manually set 5GHz band Network Name… box to manually set your desired wireless network name for the 5GHz band.

Type your desired wireless network name (SSID).

Automatically: Select this option to automatically generate the D-Link router’s network key and click Next.

Manually: Select this option to manually enter your network key and click Next.

dlink-router-Wireless-Security-1

If you selected Automatically, the summary window will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings.

dlink-router-Wireless-Security-2

If you selected Manually, the following screen will appear.

dlink-router-Wireless-Security-3

Add Wireless Device with WPS Wizard

From the Setup > Wireless Settings screen, click Add Wireless Device with WPS.

dlink-router-Wireless-Security-4

Select Auto to add a wireless client using WPS (Wi-Fi Protected Setup). Once you select Auto and click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection.

dlink-router-Wireless-Security-5

PIN: Select this option to use PIN method. In order to use this method you must know the wireless client’s 8 digit PIN and click Connect.

PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect.

dlink-router-Wireless-Security-6

Tags: , , ,

Feb 22

This button is the Wi-Fi Protected Setup button. Wi-Fi Protected Setup (WPS) is a simple way to connect to a wireless network without much configuration. With WPS, it will automatically configure a wireless network with a network name (SSID) WPA security key and authentication. WPS is designed to support various Wi-Fi certified 802.11 products.

DGL-4500left

wps help:

D-Link Wireless N Network Camera Installation And WPS DCS-930L As an Example

Tags: , ,

Feb 16

This article will teach you how to set up D-Link Wireless N Network Camera and WPS setup,DCS-930L As an Example.

Quick Installation:

Step 1:

Connect the included Ethernet cable to the network cable connector located on the bottom panel of the DCS-930L and attach it to the network.

Step 2:

Attach the external power supply to the DC power input connector located on the bottom panel of the DCS-930L and connect it to your wall outlet or power strip. Power is confirmed when the green LED Power Indicator located below the lens is lit.

Step 3:

Insert the DCS-930L Driver CD in the CD-ROM drive. If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D: represents the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears, click Install and follow the on-screen instructions.

Step 4:

Click on the Start button to start the wizard.

DCS-930L

WPS Setup:

Alternatively, you may create a WPS connection if your router or access point supports WPS. To create a WPS connection:

Step 1:

Press and hold the WPS button on the side of the camera for three seconds. The blue WPS status LED above the button will blink.

Step 2:

Press the WPS button on your wireless router or access point within 60 seconds. On some routers, you may need to log into the web interface and then click an onscreen button to activate the WPS feature. If you are not sure where the WPS button is on your router or access point, please refer to your router’s user manual. The DCS-930L will automatically create a wireless connection to your router. While connecting, the green LED will flash and your camera will reboot.

Tags: , ,

Jan 28

Wi-Fi Protected Setup (WPS) is a standard for easy and secure establishment of a wireless home network, created by the Wi-Fi Alliance and officially launched on January 8, 2007.

The goal of the WPS protocol is to simplify the process of configuring security on wireless networks, thus it was first named ‘Wi-Fi Simple Config’. The protocol is meant to allow home users who know little of wireless security and may be intimidated by the available security options to configure Wi-Fi Protected Access, which is supported by all Wi-Fi certified devices.

The standard achieves its goal by putting much emphasis into usability and security, and the concept is implemented through four usage models that enable a user to establish a home network.

Let’s take the D-Link DIR-655 wireless router as an example.

Unconfigured mode:

DIR-655-WPS1

By default, after setting up your wireless device with WPS and Push Button Configuration (PBC), the only step you need to do is press the WPS button on the side of the router. You would not need to create a wireless network name (SSID) nor a security key.

Configured mode:

DIR-655-WPS2

You would need to configure the following sections in your router, Wireless Network Settings and Wireless Security Mode. Both sections must be configured including a wireless security key. Save settings and Reboot.

DIR-655-WPS3

Note: After configuring the DIR-655 Wireless Network Settings you will need to enter in a Personal Identification Number (PIN) that is generated from your wireless adapter in order to establish a proper connection between client and host.

DIR-655-WPS4

DIR-655-WPS5

Tags: , , ,

Mar 10

Step 1: Right click the Wireless status icon in the task bar, to open the Wireless Manager.

Step 2: On the Wireless Manager click on WPS

Step 3: On the Wi-Fi Protected Setup select the PIN option

Step 4: Enter the PIN number on the Router or Access Point.

Step 5: The wireless card will establish the connection with the Router or Access Point.

Step 6: At this point the wireless client will be connected to the Router or Access Point using WPS PIN method, then click on Finish.

Tags:

css.php