Zipit only supports an open authentication and a long preamble. Follow the steps below to setup your router.
Note: If you are usingencryption, your network will be less secure when using an Open Authentication. You must also set your wireless clients to an Open Authentication (or Auto).
Step 1 Open a web browser and enter the IP address of the router (192.168.0.1).
Step 2 Enter the username (admin) and your password (blank by default).
Step 3 Click on Advanced and then click Performance on the left side.
Step 4 Set the Preamble Type to Long and the Authentication to Open System. Click Apply to save your settings.
Note: Depending on your firmware version, one or both of these options may be in a different location (Home > Wireless).